View full version: IDI Engine
  1. k03 turbo rebuild question
  2. 1.5D cam in a 1.6TD mech head?
  3. Exhaust tubing diameter for AAZ?
  4. overheating question???
  5. some pics of my mk1 project
  6. Hard work pays off
  7. Teh White Rabbit Build.
  8. t3 waste gate can removal
  9. Injector cleaner
  10. Can't set injection pump timing with dial indicator
  11. Can I use a VW 1.6TD crank and intermediate shaft in an 81 - 1.6D motor rebuild?
  12. Alternator squeal after engine start
  13. What happened to prothe?
  14. aaz with a 92 tach reading to high
  15. flex exhaust tubing
  16. Can I put injection pump top with LDA off 1.9TD or 1.6TD onto a 1.9NA pump?
  17. K24 Turbo Map
  18. 1.6 or AAZ gasket
  19. AAZ oil consumption / overfill?
  20. glove box light
  21. yellow dot pump on a 1.6
  22. Can an injector get to tappin?
  23. For those with a Westach EGT gauge
  24. engine overheat prevention alarm
  25. im shaft pulley how u guys remove that with minimal tools?
  26. 1.6 td GT15 Question
  27. Guide/suggestions for affordable mk1 n/a exhaust/dp/etc?
  28. Crankshaft pulley ideas
  29. 1.6d to 1.6 ecodiesel
  30. T3 on AAZ manifold question
  31. Checking main cap installation
  32. Exhaust Options
  33. 1.6td shift points
  34. Turbo Oil Feed Line Question
  35. AAZ valve cover upgrade ???
  36. Where to get a vacuum pump?
  37. need verification about replacing cam
  38. k03 rotor assembly
  39. 1.9L TD AAZ into a 2.slow shell (SWAP) - MK3
  40. My AAZ swap, some turbo connection questions, and a few others....
  41. Automatic 1.6 TD
  42. removing exhaust manifold in car
  43. Can pressure plates be reused??
  44. Changing clutch - out-put shaft came out of tranny
  45. Clocking a VNT?
  46. Resonator recomendations
  47. can you blow a headgasket over night?
  48. What's the name of that piece of plastic in the valve cover and what does it do?
  49. water intrusion
  50. 2nd Ring Specs