View full version: IDI Engine
  1. aba exhaust manifold to 1.6L diesel, does it fit?
  2. Diesel conversion HELP!!!!!!!!!!lol
  3. intermedate shaft bearings
  4. raising boost ?'s
  5. T3 Westy Atlantic AAZ project.
  6. Adjusting Valves? New Valves...New Head
  7. Did I order the wrong pistons for my 1.6TD?
  8. Contacting Giles?
  9. need to choose a tranny for my 81 rabbit
  10. head torque conflict... Bentley VS AENOR / ajusa
  11. Leaking oil bad!
  12. 1.6TD cracks between valves, HELP!? 1st post
  13. T3 exhaust flange to fit 1.6 td Jetta?
  14. pump timing
  15. Black Nitrous button? what the heck is it?
  16. Bigger Compressor housing and Wheel on stock T3
  17. Oil light + buzzer
  18. Crank fix in Calgary?
  19. who knows if 1.7 TD pistons will work in a 1.6 or 1.9?
  20. oil leaking out of lower dipstick tube.
  21. Clean air test in Ontario Canada ?
  22. Intermediate shaft to oil pump gear....which one?
  23. 1.9 IDI Exhaust
  24. valve timing
  25. What turbo produces the best fuel milage on a 1.6 ltr?
  26. Timing belt covers
  27. Exhaust... could it be too big?
  28. Which turbo for AAZ Engine
  29. How much rust is too much rust honestly?
  30. slow starting, but somtimes starts normal
  31. replace intermediate shaft bearing or not??
  32. Cam nuts torque specs?
  33. Building a 1.6 the RIGHT way
  34. aarrgh!! no fuel!
  35. TDC cam to crank
  36. Cam seal=groves worn into my cam=??
  37. Ecodiesel airbox functioning question
  38. injectors
  39. dynamic timing, tune
  40. Anyone selling a head gasket (2 notch) and 12mm stud set ?
  41. ROVER pump - straight swap
  42. Drilling a 11mm head to accept 12mm studs
  43. Where do these go?? Jimfoo....?
  44. replaceing the pump on my 97 Mk3 Golf AAz
  45. 1.6 TD / AAZ Injector pump question...
  46. How to PORT and POLISH
  47. Exhaust manifold and helicoils
  48. 1.6 TD / AAZ Injector pump question...
  49. Is Balanceing needed when changing to 20 over pistons ??
  50. Injector nozzle types