View full version: IDI Engine
  1. T3 turbo need help
  2. T25 flange 8v exhaust manifold?
  3. 1.6 thermostat replacement...housing won't seat
  4. New to 85 jetta 1.6 TD.
  5. 92 1.6td black smoke at every takeoff and gear.
  6. 1.6TD motor starts to smoke white smoke after warming up
  7. windage tray install??
  8. MK3 AAZ questions
  9. New 1.6TD Pre-combustion Chamber Inserts
  10. New CV Shafts from The Driveshaft Shop.
  11. where is my brake fluid going?
  12. Opinions on prechamber swapping, and ceramic coatings
  13. Switch to Dot 5 Silicone?
  14. Anyone ever try installing this M&H dynamic timing advance spacer on there VE pump?
  15. Ecodiesel 39% opacity failed emissions test
  16. 1.6 Crank noses, are there different types?
  17. aaz fuel pump braket
  18. 1.6NA to TD - Yes common question I know
  19. gaskets to go
  20. Aaz dipstick tube length
  21. AC in non AC VW Pickup?
  22. p/n of IP advance/high idle lever plastic bushing
  23. Basic IDI vs mTDI questions
  24. Engine block green paint.
  25. Bigger intake valves?
  26. Clocking VNT BV39 turbo - plenty of pics but no idea....
  27. Oil consumption AAZ
  28. Help with engine bay dimensions
  29. Oiling for compound turbos
  30. Holset replaces K-14
  31. Help me brainstorm
  32. MK1 1.6 TDR taking on mk2 GTI 16V... help me get there!
  33. Intermediate shaft pulley failures, anyone?
  34. 1.6 sb td mk2 golf to 1.9 tdi
  35. Turbo a 1.5l ... 79' Rabbit
  36. New motor for an 82 Westie
  37. '84 GTI turned 1.6 TD
  38. One more arp head stud torque question
  39. Adapting '81 1.6N/A for "industrial" use
  40. 1.6 GTD head
  41. newbie alert
  42. 86td wont respond to throttle until i press it half-way
  43. electrical issue
  44. minimum clearance valve to piston aaz
  45. Holset install
  46. "Stretched" head bolt length
  47. 1982 vanagon
  48. Nissan LD20 specs usable for vw pumps?
  49. Head Stud depth
  50. cracked injector bore