View full version: IDI Engine
  1. WVO build threads
  2. Rebore needed or hone and new rings?
  3. audi k24
  4. Where and how measure piston protrusion
  5. Tuning for best MPG
  6. bigger head.what about the shim to adjust k(or kf)setting?and timing advance?
  7. dead cylinder after rebuild
  8. HELP! timing issues.....
  9. Pictures of stock 1.9TD and 1.6TD turbos
  10. does aaz head usually deform after overheating?
  11. What kind of turbo is this? And what is that hose for?
  12. Machine shop called...said I had to come look...
  13. Another injector thread - 1.9 AAZ turbo 135 or 155?
  14. Another Cooling Coolant question
  15. Which 1.9 gasket for a 1.6?
  16. What to cool to reduce 1.9 AAZ temps on VW van
  17. fuel screw o-ring replacement
  18. Valve cover gasket upgrade question
  19. Can pistons from a JX be used in an RA??
  20. oil change using vacuum
  21. changing coolant temp sensor without spilling coolant?
  22. Will a lift pump affect timing?
  23. GTD injectors ad nozzels and t2 tubro
  24. 1.6 td IP idle
  25. 1Y head on a 1.6 TD
  26. Mk1 fuel check valve ?? Engine cranks not starting.
  27. IP base fuel pressure
  28. Additives
  29. snapped timing belt and blown headgasket.
  30. tickey lifter?
  31. 1.6TD Turbo upgrade ?
  32. Altitude sensing = boost sensing?
  33. Fuel screw leaking?!?!
  34. VNT rebuild questions
  35. how do you adjust turbo boost on an AAZ?
  36. 1.6TD head on a 1Y block???
  37. need help with coolant temp sensor resistance
  38. Solid Lifters in two drain holed head?
  39. no start (with a twist)
  40. K14 gasket ???
  41. timing belt install question
  42. #2 main cap broke on aaz
  43. Twin plenum design questions? - Now finished 1Y based manifold
  44. MK3 Golf Big Build
  45. Gauging interest for repro GTD badge
  46. Best Way to Store an Injection Pump?
  47. early 1.9TD injection pump on a 1.6TD motor???
  48. 1.6GTD head gasket and engine specs
  49. High Rev'ing
  50. Vnt install