View full version: IDI Engine
  1. "electric" aaz pump...want to simplify!
  2. Lubricant Gobbledegook
  3. Anyone here promoting or running the 19:1 CR philosophy?
  4. 02a swap question
  5. Two evil bolts on the crankshaft pulley
  6. very irritating
  7. Head Gasket Preload
  8. PD Crank into 1Y??
  9. Darth Garry Apprentice Training...
  10. varnish in ve bosch pump
  11. Full Load Adjustment Screw
  12. WVO & Injector breaking pressure
  13. crack in block?
  14. Is a leaky IP hurting things? or is it ok to run for a while?
  15. Turbo calculations and compressor maps
  16. IP swap question
  17. 2nd ring on a M21D24 piston
  18. No cooling system
  19. Rings?
  20. need new head........
  21. Governor differences on NA vs. TD pumps
  22. TD Exhaust manifold flip on A2: Not possible
  23. Auto trans rebuild/hop up..
  24. Fastest Nozzle change and GP check - for 8v-of-fury ;)
  25. GTD into a corrado?
  26. AAZ Build Up
  27. t2 turbo indexing
  28. Oil in the intake 1.9 td
  29. Idling issues and EGR vacuum pipes.
  30. Cold Start Cable Problem
  31. PD150 INTAKE ON A 1.9 AAZ ??
  32. part number of rubber valve cover gasket for 1.6 engine
  33. Where can you buy heat shields?
  34. turbo head vs. non turbo head
  35. TECHTONIC'S TUNING DOWNPIPE 1.9 AAZ 2.5 ' VW MK Caddy
  36. Minimizing smoke
  37. Resealed my pump.
  38. 1.6TD issues.........
  39. question about which IP to use, aaz to mk1 swap
  40. mk3 AAZ clutch slip - advice please
  41. IP timing question
  42. Injector pump shaft Bolt
  43. Oil feed line size
  44. Stripped feed pump cover screws while disassembling injection pump..suggestions?
  45. Oil temp/pressure senders - fit?
  46. Clutch failure
  47. best exhaust setup for turbo sound?
  48. VNT17 Fitment, pictures.
  49. Has anyone done a N/A >Turbo 1.6 write up???
  50. Tuning mk2 1.6 cl td HELP