View full version: IDI Engine
  1. Loud injectors
  2. Oil From Turbo Intake
  3. injector seals (slight return)
  4. EGT 1300 degrees in AAZ vanagon , fuel turned down!
  5. oil drainline
  6. Performance exhaust
  7. 1.9 AAZ engine 'problem'
  8. Alternator Idler Pulley Bearing Replacement
  9. Uk mk2 golf gtd boosting problem
  10. Alternator interchangeability - AAZ/1Z/AHU - A/C - no A/C
  11. Finished my car...photos
  12. My 81 vw pu 1.6 na to td build
  13. Eco turbo oil lines
  14. The difference between 1.6NA and 1.6TD pumps.
  15. Exhaust Ceramic Coating
  16. Slight overheating - pump timing?
  17. TT 65 Shore rear trans mount too hard?
  18. Electrical information
  19. Interchangeable ?
  20. ultimate-ish 1.6td build?
  21. AAZ pistons in ALH block
  22. It's almost time to start on the ol' Rabbit again...
  23. my 86 pirelli 4 door gas to diesel build
  24. Thezorn's AAZ rebuild.
  25. K03 Strange turbo?
  26. Wiped out I-shaft bearings
  27. new headgasket and Giles pump, wont start (now with video)
  28. 1.5 head bolts
  29. Can I detect miss by feeling injector line?
  30. New to me 1.6TD
  31. If I use this (slightly damaged) cam....
  32. adjusting idle RPM
  33. AAZ Low oil pressure
  34. 36mm oil pump?
  35. ill ask.. but know better.. welding cracked head...
  36. Cracks in Pre-Cups
  37. Parts place head?
  38. Fire in the hole and other disasters.
  39. 1998 ko3 turbo wastegate
  40. MKIII 1.9AAZ winter morning starting issues.. HELP!
  41. Not getting fuel to injectors, help me trouble shoot
  42. Pulling the head with the turbocharger attached.
  43. Has anyone tried valve pockets in IDI pistons?
  44. Oil Filter Bracket Choke plug - Missing
  45. Temp wiring on 85 IDI question
  46. Injector return pipe: anyone found anything better?
  47. 84 NA (for now) Rabbit Wolfsburg Build Thread
  48. Internal Pressure - Different specs
  49. Diesel runs but won't rev up.
  50. camshaft question - 1.6 mechanical head