View full version: IDI Engine
  1. aiming for 180hp+ with AAZ...
  2. Poll: Roll Starting After Rebuild?
  3. Where is my oil going?
  4. Rear triangle injection pump thing.... leaks
  5. 1.6 Rebuild Questions - Almost There!
  6. 1.9 head on a 1.6td block or variations
  7. 11mm versus 12mm
  8. Adding a pulley??
  9. Couple swap issues that need to be resolved..
  10. 11 mm Head bolt woes; go to studs?
  11. Crank Stud??
  12. Serpentine Belt Length
  13. Where to buy turbo gaskets
  14. Main pump head seal size
  15. 1.6 pump differences
  16. Help i.d.-ing this part
  17. injector spray pattern?
  18. Pistons for AAZ - .020 over
  19. N/A pump mod for this setup??
  20. Vacuum lines?
  21. Adding A/C compatibility with gasser parts
  22. Almost There!! It Runs!! :) and hemorrhages fuel :(
  23. Swap, Alternator won't excite.
  24. pump advance to much?
  25. oil color
  26. New member - Volvo 2.4 TD
  27. exhaust studs keep braking
  28. oversize piston pins?
  29. Injection pump problems.
  30. 81 Caddy steering column clunk
  31. 81 caddy 1.6 questions
  32. Which injection pipes for a franken 1.6/1.9 engine?
  33. Breaks and rough running. Related?
  34. Ordering turbo rings and bearings. Which ones do I need?
  35. Intercooler delete, any adjustment needed on the IP?
  36. AAZ into MK1 issues
  37. how does fuel temperature effect performance/economy?
  38. Difference between hex head bolts and 12 pt head bolts???
  39. I have 3 flywheels - so is putting a lighter flywheel on 1.6TD benificial?
  40. k03 from gas engine cartridge to diesel ?
  41. Need Oil Control Ideas
  42. what makes slight tck soynd when cold..?
  43. how do you reinstall this clips? (exhaust question)
  44. 1992 passat VR6 to 1.6TD swap
  45. Engine Timings of 2.4 TD VW motor in VolVos 760 960 940
  46. Anyone have mls gasket/arp studs/1.6 block? help me test something...
  47. oil pump bushings for AAZ engine
  48. looking for oil pump for vanagon AAZ
  49. Piston Q's
  50. Help me out with a measuring tape!