View full version: IDI Engine
  1. How to Tell 1.6 Heads Apart
  2. 1.9 TD AAZ intercooler options
  3. 1.6 headgasket?
  4. T3 or K24?
  5. General PCV question
  6. 1.6 or 1.9 - can't decide
  7. Injector Stuck?? Carnage Pics!!!! :)
  8. AAZ won't pump fuel...
  9. AAZ Turbo Upgrade
  10. Manual Boost Controller.......what to get?
  11. 1.6TD now won't start at all!
  12. Diameter of AAZ dipstick tube hole?
  13. More on breaking in a new engine
  14. 1.6L Diesel NA Connecting Rod Wrist Pins
  15. 1.6td with 1.9 head
  16. What are the EGT's at idle?
  17. 1.6TD hates starting when warm
  18. 1.6D NA Running poorly
  19. AAZ oil temperature
  20. vanagon aaz oil quantity
  21. single stage vs. 2 stage injectors
  22. AAZ Boost / rpm.
  23. Ethanol ip leak fix
  24. Possible cause for vanagon AAZs puking oil out the dipstick tube
  25. Leak at injection pump
  26. Thoughts on a recent compression test
  27. Issues with rad fan
  28. No fuel at injectors
  29. mk1 rear tran mount where to buy?
  30. 1982 Vanagon AAZ Finding TDC for Crank
  31. Just curious...
  32. Broke aaz vacuum pump plastic hose connector
  33. Anyone done water/meth injection on an AAZ?
  34. Holset choice?
  35. Old article by David Vizard on Do-It-Youself porting
  36. air bubbles in injector overflow lines
  37. high idle after injection pump rebuild and cold start lever does nothing
  38. Smoke at idle
  39. giles pump tuned for k24 paired with k03
  40. 25psi boost, rebuilt k14, ARP studs and AAZ MLS
  41. Attempted pump repair and rebuild
  42. How do you test oil squirters?
  43. What is causing this after head gasket and injection pump rebuild?
  44. Thread size for 1.6D NA fuel injectors
  45. questionable rebuilt pump
  46. Need help in I.D. of engine
  47. Crankcase breather - valve cover leaks
  48. VW 2.4 Diesel Best Nozzles (Volvo D24)
  49. Looking for aftermarket cold start cable. AAZ in a Mk1
  50. No compression after head gasket job?