View full version: IDI Engine
  1. Torque specs
  2. K14 Turbo Rebuild
  3. Am I operating on a misunderstanding?
  4. Water pump replacement pitted surface
  5. Looking for pics and/or part number of 1V Ecodiesel drain line.
  6. AAZ K14 turbo on 1.6td
  7. Turbo converted polo 1.4d(n/a) (1W) with video´s
  8. What injectors to use on a 1.9TD AAZ?
  9. Anyone with an AAZ Head Gasket Chart handy?
  10. Injectors installed without heatshields.
  11. Arco AAZ Pistons Does the Coating change the piston to bore spec?
  12. AAZ Vanagon boost peaks holds for a second then drops off after adjusting fuel
  13. Oil pan mating surface corrosion on block
  14. 4 diesel mk1's at the junkyard
  15. Injection pump damaged by forcing cold start cable at TDC?
  16. 1.6TD Glow plug activation
  17. What is a symptom of the piston striking the head?
  18. Head of Toast?
  19. NOS CY condition
  20. How to make a AAZ K03 Hybrid Turbo?
  21. 1.6TD bore scratches
  22. AMC 1.6TD head after 5000miles
  23. AAZ rod wear @tangs
  24. New Bosch VE pump - basic settings
  25. crossposting - MK2 overheat / water pump questions
  26. Disassembling veggie block w/ piston slap- rod length?
  27. NOS 1.6td pumpe!
  28. K03 Bad Wastegate Actuator?
  29. 5 turbo side-by-side
  30. 1.6TD manual boost controller
  31. Oil in exhaust
  32. 1.6 timing belt break results
  33. Question on compression testing
  34. Battery light after alternator upgrade
  35. bench testing turbos
  36. 1.6NA frankenhead condition assessment
  37. About to get 1.6D block bored for turbo
  38. Where to buy timing tools
  39. AAZ bore measurements
  40. Injector overflow nipple removal
  41. Holset swap info and flange adapter
  42. 1.6D vs. 1.6TD crankshafts
  43. Largest radiator for mk2 jetta 1.6NA
  44. 1.6td fuel screw question
  45. 1.6td mf block injection pump
  46. 1.6 CY TD or 1.9TD aaz?
  47. Cam tuning
  48. 1.6 td temperature light flashing
  49. VNT Turbo on 1.6TD
  50. 1.6td sensors vs 1.6 n/a sensors (coolant,oil press.etc...)