View full version: IDI Engine
  1. anyone know much about the crankcase vent. tube?
  2. Head bolts nightmare
  3. oil pan
  4. Gasket between turbo and manifold
  5. 3" exhaust on 1.6 n/a
  6. Oops - piston and valve contact suspected...advice needed!
  7. slow crank with cold start handle
  8. 1.6 N/A or TD into Sidekick/Tracker q's
  9. is the aaz already tapped for EGT probe?
  10. problem with the water pump outlets interfearing....
  11. need source for crank bolt
  12. IP Ugliness
  13. Part 1 The Block
  14. How do I find TDC...
  15. Leakdown test results, what do you think?
  16. 1991 turbo shuts off while driving?
  17. Cruise Control Qs?
  18. engine rebuild questions PLEASE help.
  19. Anybody else....
  20. So are copper Head gaskets any good??
  21. Came across this this morning
  22. IDI 1.9 metal head gasket part number??
  23. changing a timing belt, without loosing the timing??
  24. Junk yard gasser 1.6td swap
  25. Special Socket for removing turbo?
  26. 1.6td enough to push a passat wagon?
  27. t3 turbo off a volvo 740, will it work on a aaz
  28. 1.6 injectors in an AAZ
  29. AAZ or MF golf/jetta emissions tag
  30. rotating mass (balance)
  31. question regarding 1.6n/a block to td w/1.9 Oettinger head ?
  32. Ociliscopes + W signal = universal tach converter/controller
  33. Oil pan source
  34. 1.9 TD Questions
  35. Merc 300TD turbochargers any use?
  36. oil cooler question
  37. Ideas for how to pop test 2-stage 1.9 injectors
  38. 1.6 to ? transmission
  39. T2 vs T3 on a 1.9IDI
  40. cam Question #2
  41. Leaking vent on 1.6td pump
  42. duno if anyone noticed
  43. passenger performance 1.6td downpipe
  44. Replacing head bolts
  45. cam question
  46. Pulling the head
  47. Thermostats
  48. Do New Valves New Head need lapping?
  49. General timing question
  50. real quick ARP head stud question.....