View full version: IDI Engine
  1. Need torq for injector install on head
  2. When my car is cold started it runs rough
  3. block heater- how long can it stay pluged in for
  4. Newbie with GTD questions...
  5. flywheel bolt torque
  6. Turbo head part number
  7. My Official Build Thread! :) Updated!!!
  8. hello all, new here
  9. 11mm ARP stud torque values?
  10. Cracked block question
  11. Few questions regarding NA IDI (doing a swap)
  12. glow plug fuse amp rating?
  13. Yanked 1.5 injectors
  14. 1.9TD Crank same as 1.9TDI crank?
  15. 1.9 IP on a 1.6 n/a: Bigger camplate=more hp?
  16. interesting read
  17. Intercooler piping idea
  18. Tranny Swap, opinions please
  19. Serpentine Tensioner
  20. Snag in timing belt / water pump job
  21. Engine block expansion plug Q.
  22. white plastic thing On top of the fuel filter
  23. oil cooler or oil heater in the far north winter.
  24. HELP!!
  25. Anyone know the thread pitch for 1.9TD cylinder head bolts?
  26. Boost Pin Mod???
  27. Upgrades Question???
  28. 1.6 Inj. Pump - NA vs. Eco
  29. cross thread injector seat..
  30. Fast GPS....slow gps whats..
  31. Quick intro and let me pick your brains (Please)
  32. 12mm head on a 1.6 pump
  33. Just to make sure I can boost hard.
  34. AAZ Poor Economy
  35. 1.6TD into 81 caddy
  36. Glow Plug Toggle Switch
  37. Need to find pre ignition cups for a 1.6td head?!?!?!?!?!
  38. Alternator question
  39. VW 1.6 TD
  40. high rpm's??
  41. Winter time again, time to upgrade
  42. Turbo exhaust
  43. SOLDSOLDSOLD
  44. 2.4 NA to turbo upgrade
  45. possible diesel head gasket failures
  46. Head porting
  47. Intermediate Shaft Pulley Torque Specs Specifications
  48. Delete
  49. Warming up diesel before it gets into the motor?
  50. Anyone have experience with Water/Meth injection?