View full version: IDI Engine
  1. Retorquing Cyl Head
  2. Observations: NA pump vs TD pump with a vnt15.
  3. I've noticed a few things here lately.
  4. 85? mech TD into a 92 hyd na
  5. Less power after retorque
  6. 1.7 headgasket on a 1.6?
  7. 1.9td vs 1.9d head and oil squirters on d block
  8. Oil feed line fitting size's
  9. 1.6 NA ???? About AC
  10. intake manifold for a gtd
  11. Fuel Preheater theory and application
  12. Trans q's
  13. Eco diesel pump ??? Or a TD w/o the LDA ?
  14. noob 1st post--hello!
  15. Long Cranking New Engine
  16. intermediate shaft bearings
  17. Diesel Pinging?
  18. 85 1.6 td, wrist pin bearings, WHERE to buy them?
  19. Ordered Giles injectors
  20. Head Studs: Who's running them and which ones?
  21. Caveat Emptor Turbos
  22. Motor Mount Question
  23. ?
  24. keep blowing exhaust manifold gaskets
  25. IC size???
  26. My new Golf GTD - jingling noise
  27. AAZ wiring and sender Q's
  28. SLOW START<LONG CRANKING TIMES
  29. Bildon oil pan
  30. Lightweight Lifters
  31. Help on a new car
  32. stretch bolts
  33. mech Vs hydro motors?
  34. New to the 1.6TD
  35. Electrical Gremlin
  36. 1.5 connecting rod length
  37. AAAAARRGh! seized!
  38. idi diesel to idi diesel......can it be done!!!
  39. Pre-cup cracks
  40. defective pump or fixable?
  41. RPM limit versus powerband increase tradeoff
  42. AAZ oil cooler
  43. fuel filter placement
  44. Where's your redline?
  45. Putting a mk2 cluster in a mk1
  46. TD trans ID ??
  47. My IP Rebuild
  48. 1.9AAZ intake manifold alloy elbow wont budge...
  49. 1.5 compression numbers
  50. Deck crack near head bolt hole