View full version: IDI Engine
  1. Clocking turbo
  2. Topline T/D head 20000 mi later
  3. I got my VNT 15!
  4. Too much boost on worn out rings.
  5. Oil Changed!
  6. what IP reseal kit do I need?
  7. What is this AAZ pump?
  8. stop solenoid
  9. My 1.6 TD build
  10. Short or tall injectors?
  11. AAZ injector socket
  12. My own pop testing thread.
  13. Old injectors, new rebuild, interesting pop testing results...
  14. BOV question
  15. Cold morning starting..
  16. Old GP relay vs new GP relay
  17. Oil cooler-pressure gauge project questions
  18. For those owners with Oil Pan Guard's ( Oil Change drain plug)
  19. Preparing a HYDROLIC! CY engine for boost
  20. EGT hotwire location
  21. Garrett T3 wastegate getting in the way of oil return line
  22. Exhaust brakes again...
  23. Transmission Rebuild?
  24. Four Notch Head Gasket
  25. Close one!!!
  26. Keep snapping conrods.....
  27. Cylinder head coolant Flange 068121133 M ( front ) single sensor MK1
  28. how much boost with stock manifold? (CAD pics inside)
  29. SWAP mk3 golf AAZ into MK3 golf gasser
  30. Crank pulley wobble (again).
  31. Head torque sequence when using studs and MLS gasket?
  32. TD build - 1.6 vs 1.9 head + turbo help needed
  33. Connecting rod big bore size for 1.6td?
  34. thrust washers
  35. How does the starter motor earth?
  36. Question about idle
  37. BOV seal
  38. 1.9 AAZ Suzuki Vitara build
  39. how to identify correct turbo
  40. Need a little help with the brakes on my 1.6td
  41. question about crankshaft nose
  42. Clicking from dash and under car with different throttle positions? (aaz)
  43. EGT's??
  44. AAZ oil filter adapter
  45. VNT Turbo
  46. Idle a bit high after Giles pump install
  47. Engine block girdle kits - New batch, WORLDWIDE shipping
  48. Intercooler question
  49. Compression Test Specifications for AAZ engine
  50. What is this part? IP related