View full version: IDI Engine
  1. Porting 1.6 head to suit PD intake
  2. 1.8L to 1.9TD swap
  3. what do you guys think of this Caddy
  4. pulling injection pump shaft seal
  5. C clip on IP advance lever
  6. How do you remove the throttle thing on AAZ pump?
  7. VNT control design problem
  8. Deleting A/C
  9. I want to put a serpentine belt drive on my 1992 Jetta Ecodiesel with A/C
  10. Possible VNT actuator?
  11. Them thar rubber flappers
  12. Is this bad?
  13. Glow plug overide switch
  14. 1.6 TD rebuild questions
  15. Intercooler for MK2 A/C car
  16. loud noise and loss of power?
  17. 1.6 NA and 1.9 TD.. few questions.
  18. Residual Fuel Delivery Adjusting Screw, Checking and Adjusting.
  19. GTD pics
  20. Towing
  21. Where to get a gasket set for AAZ injection pump ?
  22. valve spring compressor
  23. AAZ head missing integral pieces ??
  24. A question for those with prothe cylinder head experience
  25. Is this 1.6td setup right?
  26. oil pump for aaz vanagon conversion
  27. vane control
  28. measured piston protrusions with dial gauge indicator
  29. black smoke on an AAZ without turbo
  30. Are Prothe engine gasket set ok to use?
  31. Which head gasket and bolts?
  32. 1.6 TD fixins on an AAZ longblock
  33. how to increase maximum speed?
  34. Ecodiesel and other questions
  35. Pulling cyl head- running into problems- need suggestions
  36. Fuel filter reccomendation to replace eco diesel filter?
  37. Measuring bores, which tool to get?
  38. Possible Scirocco for TD project?
  39. governor mod
  40. advance mechanism leak - how hard to repair?
  41. Try to start Frankenmotor for the first time.....
  42. plunger from a pump with diferent rotation?pump speed?
  43. 1.6D Swap
  44. Do Injecters ever go bad+easiest way to remove
  45. IDI Pump Rebuild Questions
  46. Coolant pipe for SB engine
  47. 1.9TD crank pulley repair pics
  48. pump assembly questions
  49. Need Missouri Machinist
  50. Head Gasket Question