View full version: IDI Engine
  1. K24 oil drain flange size?
  2. K24 and T3 - Long term max boost?
  3. high altitude ip pump
  4. New Pump Appears to have Stopped Pumping Fuel
  5. Turbo Oil Inlet Fitting ( Adapter ) M12x1.5 to M14x1.5
  6. 1.9 AAZ Turbo Feed Line ( Turbo Oil Inlet ) S/S Production
  7. N/A intake idea, OK or hokey beyond belief?
  8. Internal pump pressure.
  9. De-glazing/Honing engine question.
  10. 12.9/14.9 grade cap head bolts
  11. Pump Install Question??
  12. Source for rabbit fuel tank cap?
  13. Rejuvinating a poorly SB.....
  14. piston protusion ?'s noobish
  15. Internal pump pressure measured, poor results???
  16. Another VNT controller
  17. MORE Power
  18. Fuel filter question
  19. TD engine with enough power to...?
  20. Can you mix synth with convec oil?
  21. 02a swap, homemade cable clutch actuator
  22. Need a quick answer! ARP HeadStud Size...
  23. thread pitch for oil pressure sender?
  24. Transmission Mount switch
  25. 16Vclutch on an AAZ?
  26. Gm Nozzel?
  27. amp draw for starter?
  28. Monster Spec pump, searched but no info found!
  29. Would you use this block.
  30. injectors
  31. AAZ Clutch Assy ( New Stock )
  32. Most cost effective way of installing AAZ in 82 Vanagon diesel
  33. Good cheap clutch upgrade for 020 clutch
  34. Diesel Corrado
  35. Stuff I bought from prothe
  36. source for coolant hose?
  37. Timing belt tension...
  38. transmission fluid and cavitation
  39. what turbos bolt on directly in place of a K03?
  40. i finally did it - pics and vid inside - aaz with t3
  41. Opinions would be helpful :)
  42. TDI block for IDI setup
  43. 1.6 Swap into A3 Golf?
  44. 1.9aaz pump on 1.6td
  45. SWEPCO lube products
  46. Identify IDI pumps by part number?
  47. Mercedes Turbo
  48. I ditched my turbo.......
  49. TD into Caddy - rebuild & install how-to (link)
  50. timing 1.9D N/A 1Y motor????