Author Topic: Seeking comments on using a 1.6 TD inj pump on an AAZ motor (Read 2266 times)

bigblockchev · « **on:** July 13, 2007, 11:40:15 pm »

I'm wondering if I would be better off to replace my tired AAZ inj pump (it's an Ecodiesel too) with a pump from a 1.6TD rather than getting the AAZ pump rebuilt. Anyone have any experience good or bad with this situation. Cheers Dan

steel-jaw-sasha · « **Reply #1 on:** July 14, 2007, 12:49:22 pm »

don't fit I believe the shaft size is different the best mod if you have the two pump is to use the top off the 1.6 pump on the 1.9 pump. Giving you more boost fuel etc.

Dr. Diesel · « **Reply #2 on:** July 14, 2007, 01:01:01 pm »

it'll work, but you need to put all the 1.6L bracketry on the engine. Can't remember if the serpentine belt bracketry will mate with it without mods. You might also need to put the AAZ pump's delivery valves into the 1.6L pump.

bigblockchev · « **Reply #3 on:** July 15, 2007, 01:57:15 pm »

bump for more comments