1.6td pump on aaz?? - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• 1.6td pump on aaz?? by Jimmy Diesel Junior on 23 Mar, 2007 13:10
• Hello all. I realise that this may be bordering on the annoying   But.... I want to perform the governer mod to my aaz but am afraid of cabbaging the pump in the process. I have quite a number of 1.6td pumps so i am wondering if i perform the mod to one of those pumps, can i then fit that 1.6 pump to the aaz if it turns out to be a success??? thanks guys
• #1 by Audi80 on 23 Mar, 2007 13:21
• 1,6 pump will fit to AAZ. You could have to change pump bracket and pulley.
• #2 by Jimmy Diesel Junior on 23 Mar, 2007 23:27
• Thanks for reply. Would the 1.6 pump be strong enough for the aaz??
• #3 by jtanguay on 24 Mar, 2007 04:59
• Quote from: "Jimmy Diesel Junior"

  Thanks for reply. Would the 1.6 pump be strong enough for the aaz??

  
  
  don't they use 1.6 pumps for 1.9 TDI's???  :wink:  granted they use a stronger plunger.... hmmmm
• #4 by Audi80 on 24 Mar, 2007 13:53
• Quote

  
  don't they use 1.6 pumps for 1.9 TDI's???  :wink:  granted they use a stronger plunger.... hmmmm

  
  
  It´ll be fine with AAZ, but not wit TDI :shock:
• #5 by Jimmy Diesel Junior on 25 Mar, 2007 05:31
• HUMMMMMM. I think i will go for it and see how i get on   Do i need to change pump bracket etc as was stated earlier or will it fit up ok?? Do i need to use the 1.6 or aaz injectors??? Thanks for your help guys  
• #6 by Jimmy Diesel Junior on 25 Mar, 2007 06:36
• HUMMMMMM. I think i will go for it and see how i get on   Do i need to change pump bracket etc as was stated earlier or will it fit up ok?? Do i need to use the 1.6 or aaz injectors??? Thanks for your help guys  
• #7 by jannemann on 27 Mar, 2007 04:16
• Hallo,
  
  when we wanted to fix a Jx (1,6 td in a 90th VW bus) pump at a AAZ engine, we founded out, that the bolt for the belt wheel is shorter than at a AAZ pump. The frontend of the AAZ-bracket was too thick. So It was neccesary to make it thinner (about 5mm) and the fixing holes were changed into oval long holes. So the whole pump was placed nearer to the belt  and all belt-wheels were absolutely  parallel.
  
  Jan