-
Turbo mod options
by
jimfoo
on 10 Mar, 2007 16:42
-
Holy crap, if that isn't the fastest shipping on e-bay I've ever had! I am now in posession of a brand new vnt-17. Anyway, I now appear to have 3 options that I can tell. Run the vnt-17 as is, put the vnt-15 in the 17's exhaust housing, or put the vnt-17 compressor wheel on the vnt-15, along with the vnt-17 exhaust housing. The reason I'm thinking about option 3 is altitude. What do the experts think would be the best option? I live at 7400' and usually 4-wheel up to 14000'. I want good throttle resopnse. Also, how the hell do you get the bolts out that hold the back plate of the compressor housing off? My torx just seems to want to strip them out. :evil:
Thanks!!!
-
#1
by
Mark(The Miser)UK
on 10 Mar, 2007 18:07
-
I live at 7400' and usually 4-wheel up to 14000'. I want good throttle resopnse.
[/size]
What you :wink: need is a moon buggy at that altitude
-
#2
by
foxracer1
on 13 Mar, 2007 18:46
-
Hey jimfoo do you have a center section for a 15? Mine is toast but i'm sure the rest is good. The casting is broken on the compressor side.
-
#3
by
jimfoo
on 13 Mar, 2007 18:59
-
I have a brand new VNT-17 center section. I took the compressor housing and wheel off to put on my 15. The 17 has different oil passages, and also needs water however. I'm not sure what it is worth if it will work for you. I paid $320 including shipping for the whole turbo. I may need the actuator also however, and it takes a different one than the VNT-15. Let me know if you want pics. Actually the passages are just like the one on the GT2559 shown here.
http://vwdiesel.net/phpBB/viewtopic.php?t=5526&start=15
-
#4
by
foxracer1
on 13 Mar, 2007 19:02
-
I'd be interested in the pics. Would the CS fit the 15? By different oil passages you just mean for the fittings? And its water cooled also?
-
#5
by
jimfoo
on 13 Mar, 2007 19:06
-
Yes, just fittings, and water cooled. You would just need to put the back plate
for the compressor housing, the compressor, and housing on.
-
#6
by
jimfoo
on 13 Mar, 2007 19:08
-
I'll post some pics in a minute.
-
#7
by
jimfoo
on 13 Mar, 2007 19:52
-
-
#8
by
foxracer1
on 13 Mar, 2007 20:00
-
So The first pic is the vnt17 comp, center sec, and turbine in the factory vnt mani/turbine housing?
-
#9
by
jimfoo
on 13 Mar, 2007 20:04
-
Ist pic is VNT-15 comp and exhaust housing with VNT-17 center
-
#10
by
foxracer1
on 26 Mar, 2007 18:28
-
I might be interested in your vnt stuff that you want to sell.
-
#11
by
jimfoo
on 26 Mar, 2007 20:24
-
What part(s) are you looking for?
-
#12
by
foxracer1
on 27 Mar, 2007 04:21
-
A center sction. And i bent the shaft tearing it apart. So now i need a shaft and turbine wheel for a 15.
