-
need help with 1.9td head on 1.6 solid block plz!!!
by
samuraikid
on 26 Jan, 2006 22:49
-
hey guys, been reading the forum like crazy lately. i know this is kind of a bad first post. but i didnt ask for this project.
i drive a 92 samurai with a VW 1.6 td that over heated bad on me and now that i have the over heating problem fixed i need help trying to fit the 1.9 td head on to my 1.6 solid block. i know that i can use the 1.9 steel head gasket, but not sure on how to go about plugin the extra oil jurnal hole. And what ever else was to happen to make this work out. any hints or tips i would love to here!
-
#1
by
samuraikid
on 27 Jan, 2006 02:21
-
I read in a post some were that I need to modify the head gasket and plug some thong there to. and also the oil return on the side of the block needs a reducer? I haven't actually seen the 1.9 head yet. I'm sure I won't be so unsure about this when I see it all together...?
-
#2
by
samuraikid
on 27 Jan, 2006 02:22
-
I read in a post some were that I need to modify the head gasket and plug some thong there to. and also the oil return on the side of the block needs a reducer? I haven't actually seen the 1.9 head yet. I'm sure I won't be so unsure about this when I see it all together...?
-
#3
by
samuraikid
on 27 Jan, 2006 02:26
-
I can't find any posts really of any one that has acctualy done this? can anyone direct me to a step by step? with pics? or am I askin to much being a newbie
-
#4
by
samuraikid
on 27 Jan, 2006 14:16
-
ok, I get it. and then there is no other modifications I need to do.? Like cam sprockets? diffrent intake/exaust manafolds? coolent outlets? are all the same as my 1.6 solid head?
-
#5
by
vwmike
on 27 Jan, 2006 15:36
-
Well, the 1.9 has bigger intake ports, so it would be to your benefit to find a 1Y intake or something like that. A cut down 5 cyl Audi manifold would offer some longer runners than the AAZ intake. Your stock intake should fit, but it would be nice to take full advantage of the bigger ports.
-
#6
by
samuraikid
on 27 Jan, 2006 19:13
-
Well, the 1.9 has bigger intake ports, so it would be to your benefit to find a 1Y intake or something like that. A cut down 5 cyl Audi manifold would offer some longer runners than the AAZ intake. Your stock intake should fit, but it would be nice to take full advantage of the bigger ports.
i dont like the the "words they should fit" and any one tell me for sure if my stock intake/exaust manifold will fit on the 1.9td?
-
#7
by
deepmud
on 27 Jan, 2006 19:16
-
Diesel Samurai, need pics
-
#8
by
samuraikid
on 27 Jan, 2006 19:26
-
Diesel Samurai, need pics
i will post pics when i get it all back togeter and running. is that a pic of of your truck with the mattracks on it? :p are u running a diesel?
-
#9
by
935racer
on 27 Jan, 2006 19:28
-
Yes your 1.6 manifolds will fit the 1.9 head. But heres the real question, why are you wanting to use the 1.9 head so bad? Unless you are building a big power monster the 1.9 head isnt gonan do you much and it costs a lot. If you are dead set on using the 1.9 head use a 1.6TD manifold and turbo and use a PD130 or PD150 intake.
-
#10
by
samuraikid
on 27 Jan, 2006 19:36
-
Yes your 1.6 manifolds will fit the 1.9 head. But heres the real question, why are you wanting to use the 1.9 head so bad? Unless you are building a big power monster the 1.9 head isnt gonan do you much and it costs a lot. If you are dead set on using the 1.9 head use a 1.6TD manifold and turbo and use a PD130 or PD150 intake.
im not dead set on useing the 1.9 head, it is the head that i have avalible for the right price. and i am gonna use the 1.6td intake and exaust. 300$ for a complete head isnt bad? what else is it going to cost me?
-
#11
by
deepmud
on 27 Jan, 2006 19:56
-
sorry to pirate your thread, maybe we need a samurai diesel thread on here
there are a few
1.9td turned up a bit, was Suzuki transmission, now a Toyota W56
Not Mattracks, homebuilt w/snowmachine tracks. There are others.
http://www.pirate4x4.com/forum/showthread.php?t=421833I thought Canada was the land of 75$ 1.6td's?
-
#12
by
935racer
on 27 Jan, 2006 20:21
-
300 is a steal if its in good shape. I would still get at least the stock 1.9 intake or upgrade to a pd130/150 intake, the 1.6 one really sucksb
-
#13
by
samuraikid
on 27 Jan, 2006 22:51
-
sorry to pirate your thread, maybe we need a samurai diesel thread on here there are a few
1.9td turned up a bit, was Suzuki transmission, now a Toyota W56
Not Mattracks, homebuilt w/snowmachine tracks. There are others.
http://www.pirate4x4.com/forum/showthread.php?t=421833
I thought Canada was the land of 75$ 1.6td's?
that rules dude. do you use them just in the winter? or all year round. what kind of axles are they on.? i see your still spring under.? how arethey to turn? u got a hyro steer setup?
-
#14
by
samuraikid
on 27 Jan, 2006 22:55
-
300 is a steal if its in good shape. I would still get at least the stock 1.9 intake or upgrade to a pd130/150 intake, the 1.6 one really sucksb
ok i still havent seen the 1.9 head. is the intake totlay diffrent from the 1.6? i mean am i going to have to re plumb to the turbo? or can i sure that little elbow?