View full version: IDI Engine
  1. Interesting "Air In Fuel" Experience
  2. max driving rpms
  3. water pump interchangeabilty?
  4. ME1.6na crank bolt question
  5. Is this head toast
  6. Later model radiator, AAZ diesel hose connections - Vanagon
  7. 1.6td top speed?
  8. AAZ - Root beer Syncro Vanagon
  9. Assembling Frankenpump. Any advice or suggestions?
  10. A Little Unorthodox
  11. AAZ and AHU - same timing cover?
  12. Dub Nasty- The rebirth of the dirty diesel
  13. Restoring My Dasher's Engine!
  14. Blue Smoke, Oil in turbo inlet
  15. water injection questions
  16. 120 amp alternator
  17. barn find 81 caddy...
  18. Diving in.
  19. K14 oil drain 1.9 AAZ, 50 degrees
  20. Swapping a 1.6 td / Restoring a MK1 rabbit
  21. Adding oil squirters?
  22. K14 wastegate adjust screw MIA need advice for replace
  23. Bearing question
  24. Recommendations for getting AAZ Valve Cover gasket to seal?
  25. Caddy locking gas cap or door?
  26. MK1 Rabbit Upgrades... best way of turboing the 1.6 NA + 6 speed trans?
  27. What to do: 60k mile Eco D engine sat for 14 years when car was wrecked
  28. Loud rattle after modding the plunger 1.6TD
  29. NOT ANOTHER EGT QUESTION!
  30. What is this lever for?
  31. Ijnection Pump Main Shaft Play Tolerence
  32. injector heat shields stuck
  33. Spare Injection Pump has Super Fast Idle
  34. Brand Newbie here - working on a Land Speed Project (1.5L or less diesel).
  35. A few questions on an aaz swap.
  36. Aaz and 1.6 valve springs
  37. So I have this brand new injection pump.....
  38. WTB AAZ 1.9 or 1.6 Injection Pump in good working condition
  39. Valve cover
  40. Relays and GP's
  41. Anyone have a CLEAN catch can setup?
  42. EGT probe on Downpipe vs Manifold?
  43. BAE Kit, Arkay .22 Turbo = Fun!!
  44. Boost peaking @ 0.55bar
  45. After 600 miles, I got 2 cracked main caps. What the heck.
  46. Best coolant reservoir or swap?
  47. Rebuilding the 1.6 na for my Caddy
  48. AAZ woes....
  49. GP's and continuity
  50. MOVED: Heads up to those who plan on running head studs