Author Topic: ARGH! Where can I get a governor shaft NUT! NEED HELP!!!! (Read 2228 times)

coolerow · « **on:** October 06, 2006, 12:43:19 pm »

Looking for the 10mm nut that goes on the governor shaft. It's a 10mm super fine "reverse" thread nut. It's for an MK1 TD Bosch VE pump.

I have gone to about 3 different bolts & supply shops with no luck. Supposedly the reverse/left handed thread nuts are very hard to find.

any info would be greatly appreciated.

VelocityConservation · « **Reply #1 on:** October 06, 2006, 08:04:34 pm »

You MK1 Governor shaft nut looks like my Mk2 nut.

MK2 pump with Altitude compensator:
http://i96.photobucket.com/albums/l193/PhlatOut_2006/MK2-02Altitude.jpg

Mk1 Pump Normally Aspirated:
http://i96.photobucket.com/albums/l193/PhlatOut_2006/MK1-03NA.jpg

Which are you looking for?
I can definitely spare one for the MK1 pump, but not the MK2.

coolerow · « **Reply #2 on:** October 06, 2006, 08:52:25 pm »

Yea the round one is the old MK1 style then they got chaged to the hex.

hoyt · « **Reply #3 on:** October 07, 2006, 06:28:40 am »

I would do a web search and see if you can find any online suppliers.