There should be no pressure on the line to speak of. Just be sure the hose you use is rated for oil and can withstand 500F,I have no idea what fittings you'll need. "push-on" type with the proper ends for you engine and turbo will do fine with some good clamps.
Quote from: Gizmoman on March 31, 2017, 11:22:47 pmThere should be no pressure on the line to speak of. Just be sure the hose you use is rated for oil and can withstand 500F,I have no idea what fittings you'll need. "push-on" type with the proper ends for you engine and turbo will do fine with some good clamps.No no no, he is talking about the oil FEED line, not the return line.Feed line have to handle engine oil pressure.Envoyé de mon PLK-L01 en utilisant Tapatalk
Thanks everyone. A local shop here in town can build me a steel braided line pretty cheap so I'll probably go that route. I'm hopefully gunna start the project this weekend, depending on if I get the line!