Author Topic: parting 85 1.6 TD engine (Read 5524 times)

ilikevwdiesel · « **on:** March 19, 2013, 04:13:09 am »

parting an MF 1.6 with solid lifers. keeping the turbo and associated parts, everything else must go. pm with needs.

ilikevwdiesel · « **Reply #1 on:** March 20, 2013, 05:23:49 pm »

cylinder head sold. still have the pump, going to install it on my rabbit truck to test it. looking for 150 for that if it tests good.

Rising · « **Reply #2 on:** March 20, 2013, 08:31:48 pm »

how much for the oil pan shipped to 22554? or is that going with the turbo set up?

DRP67207 · « **Reply #3 on:** March 21, 2013, 11:18:04 am »

PM Sent

ilikevwdiesel · « **Reply #4 on:** March 21, 2013, 12:52:19 pm »

regarding the injection pump, it's been sitting plugged up and full of fuel for like 5yrs. I pulled the cover off the advance piston and didn't see anything like water or rust in there. will mount it on my rabbit and use a primer bulb to force some diesel purge thru it and try and start it. it should run, there's no obvious reason why it shouldn't, but this pump will most certainly need a reseal. I can do that but that would add 100 to the price. hope this helps any interested buyers.

rabbid79 · « **Reply #5 on:** March 21, 2013, 02:58:43 pm »

How much for the rods?

ilikevwdiesel · « **Reply #6 on:** March 21, 2013, 03:07:22 pm »

someone is interested in the shortblock, so i can't part it like that right now. probably would hold onto it anyways cause the bores aren't that bad really.

ilikevwdiesel · « **Reply #7 on:** March 25, 2013, 03:37:09 pm »

short block sold.

rudygetz · « **Reply #8 on:** March 28, 2013, 10:02:13 am »

Do you have an A/C compressor? Or the non-A/C bracket on the alternator?

I'm trying to convert my rabbit to non-A/C setup...do you have what I need to accomplish that?

ilikevwdiesel · « **Reply #9 on:** March 28, 2013, 10:06:11 am »

yes I do. pm sent

shwak23 · « **Reply #10 on:** March 28, 2013, 12:34:06 pm »

Do you have a glow plug bus bar and an oil cooler and all related hoses?

Sent from Outer Space!

Luckypabst · « **Reply #11 on:** March 30, 2013, 09:48:25 pm »

Lower timing belt cover?

Chris

8v-of-fury · « **Reply #12 on:** March 30, 2013, 10:07:39 pm »

How much for the pump good sir?

ilikevwdiesel · « **Reply #13 on:** March 31, 2013, 03:17:57 am »

the lower timing belt cover fell to bits when it was removed

not sure what I"m doing with the pump right now. mounted it on my na motor just to try it out but it's all gummed up inside, would only run when fuel was being forced thru it. looking for offers on it I guess. don't think there's any rust inside but maybe the head should be removed to see if there is any in there.

Author Topic: parting 85 1.6 TD engine (Read 5524 times)

ilikevwdiesel

parting 85 1.6 TD engine

ilikevwdiesel

Re: parting 85 1.6 TD engine

Rising

Re: parting 85 1.6 TD engine

DRP67207

Re: parting 85 1.6 TD engine

ilikevwdiesel

Re: parting 85 1.6 TD engine

rabbid79

Re: parting 85 1.6 TD engine

ilikevwdiesel

Re: parting 85 1.6 TD engine

ilikevwdiesel

Re: parting 85 1.6 TD engine

rudygetz

Re: parting 85 1.6 TD engine

ilikevwdiesel

Re: parting 85 1.6 TD engine

shwak23

Re: Re: parting 85 1.6 TD engine

Luckypabst

Re: parting 85 1.6 TD engine

8v-of-fury

Re: parting 85 1.6 TD engine

ilikevwdiesel

Re: parting 85 1.6 TD engine