« previous next »
Pages: [1]

Author Topic: FS: 3 inch downpipe  (Read 4798 times)

August 19, 2011, 08:49:30 pm

spencebm

  • Veteran
  • Offline
  • ***
  • 686
FS: 3 inch downpipe
« on: August 19, 2011, 08:49:30 pm »
$250 shipped!T304 sanitary stainless 3 inch downpipe with stainless v-band.  Made for a mk2 1.9td but may fit 1.6/1.5 mk1,mk3 also for T3, K24, K14 flanges.  Stainless flange also.  It is for sale on vortex also but I would like it to go to someone on this site so let me know if the price is okay.  Heavy duty clamp, not the lame thin ones.  





« Last Edit: August 28, 2011, 08:18:36 pm by spencebm »
Logged
Ben Spencer
Reply #1August 21, 2011, 02:24:19 pm

spencebm

  • Veteran
  • Offline
  • ***
  • 686
Re: FS: 3 inch downpipe
« Reply #1 on: August 21, 2011, 02:24:19 pm »
more pics for reference: turbo is for sale also, T3





Logged
Ben Spencer
Reply #2August 22, 2011, 06:54:40 am

spencebm

  • Veteran
  • Offline
  • ***
  • 686
Re: FS: 3 inch downpipe
« Reply #2 on: August 22, 2011, 06:54:40 am »
make me an offer or i will have to keep this bad boy
Logged
Ben Spencer
Reply #3August 22, 2011, 08:39:24 pm

spencebm

  • Veteran
  • Offline
  • ***
  • 686
Re: FS: 3 inch downpipe
« Reply #3 on: August 22, 2011, 08:39:24 pm »
should fit mk3s without issues
Logged
Ben Spencer
Reply #4August 26, 2011, 08:19:12 pm

spencebm

  • Veteran
  • Offline
  • ***
  • 686
Re: FS: 3 inch downpipe
« Reply #4 on: August 26, 2011, 08:19:12 pm »
Make me a good offer guys,  I need this gone or I will just run it on my car!
Logged
Ben Spencer
Reply #5August 28, 2011, 08:18:54 pm

spencebm

  • Veteran
  • Offline
  • ***
  • 686
Re: FS: 3 inch downpipe
« Reply #5 on: August 28, 2011, 08:18:54 pm »
lowered again
Logged
Ben Spencer
Reply #6August 29, 2011, 11:01:57 am

jaysen71581

  • Junior
  • Offline
  • **
  • 211
  • Personal Text
    Hagerstown, MD
Re: FS: 3 inch downpipe
« Reply #6 on: August 29, 2011, 11:01:57 am »
Love to have if i was sure it'd fit on my '84 rabbit td, and wasnt stainless...
Logged
Reply #7August 29, 2011, 11:53:41 am

spencebm

  • Veteran
  • Offline
  • ***
  • 686
Re: FS: 3 inch downpipe
« Reply #7 on: August 29, 2011, 11:53:41 am »
Quote from: jaysen71581 on August 29, 2011, 11:01:57 am
Love to have if i was sure it'd fit on my '84 rabbit td, and wasnt stainless...

Who doesn't love stainless? :)  It would probably be very close and could be made to work!
Logged
Ben Spencer
Reply #8August 29, 2011, 11:58:04 am

R.O.R-2.0

  • Veteran
  • Offline
  • ***
  • 7335
  • Personal Text
    Pacific Northwest - Oregon - USA
Re: FS: 3 inch downpipe
« Reply #8 on: August 29, 2011, 11:58:04 am »
Quote from: spencebm on August 29, 2011, 11:53:41 am
Quote from: jaysen71581 on August 29, 2011, 11:01:57 am
Love to have if i was sure it'd fit on my '84 rabbit td, and wasnt stainless...

Who doesn't love stainless? :)  It would probably be very close and could be made to work!

no, not even close.. you would have to hack it all up to make a downpipe from a mk2 fit on a mk1.. its all about where the steering rack is..

2 downpipe on a mk1 = downpipe hitting the rack so bad that it cant be bolted up..
Logged
92 Jetta GLI - Black, 1.6D w/ GT2056V turbo..
86 GTI - 4 Door, Med Twilight Gray, Tow Machine..
86 Audi Coupe GT - Tornado Red, All Stock.. WRECKED.
89 Toyota 4Runner - Dark Grey Metallic, LIFTED!

Turbo: exhaust gasses go into the turbocharger and spin it, witchcraft happens and you go faster.
Reply #9August 29, 2011, 02:04:56 pm

spencebm

  • Veteran
  • Offline
  • ***
  • 686
Re: FS: 3 inch downpipe
« Reply #9 on: August 29, 2011, 02:04:56 pm »
This is shorter than you think and probably spits out close to the rack anyway.  It just barely tucks under my mk2 and should allow you to add to it to clear whatever is in the way.  Better safe than sorry, though.  Anything can be added to it as long as it gets it pointed down past the turbo without hitting the shift linkage or heater lines.
Logged
Ben Spencer
Reply #10August 29, 2011, 04:58:05 pm

R.O.R-2.0

  • Veteran
  • Offline
  • ***
  • 7335
  • Personal Text
    Pacific Northwest - Oregon - USA
Re: FS: 3 inch downpipe
« Reply #10 on: August 29, 2011, 04:58:05 pm »
Quote from: spencebm on August 29, 2011, 02:04:56 pm
This is shorter than you think and probably spits out close to the rack anyway.  It just barely tucks under my mk2 and should allow you to add to it to clear whatever is in the way.  Better safe than sorry, though.  Anything can be added to it as long as it gets it pointed down past the turbo without hitting the shift linkage or heater lines.

its still shaped wrong to fit on an mk1..

like i said, you could make it fit, but you would have to cut it, and re-weld it.

i didnt say it couldnt be done. because it can be done quite easily, to a skilled fabricator/welder..

nice piece by the way!
Logged
92 Jetta GLI - Black, 1.6D w/ GT2056V turbo..
86 GTI - 4 Door, Med Twilight Gray, Tow Machine..
86 Audi Coupe GT - Tornado Red, All Stock.. WRECKED.
89 Toyota 4Runner - Dark Grey Metallic, LIFTED!

Turbo: exhaust gasses go into the turbocharger and spin it, witchcraft happens and you go faster.
Reply #11August 29, 2011, 06:14:56 pm

spencebm

  • Veteran
  • Offline
  • ***
  • 686
Re: FS: 3 inch downpipe
« Reply #11 on: August 29, 2011, 06:14:56 pm »
Thanks for advice on the mk1 setup, I wish they were all universal.
Logged
Ben Spencer
Pages: [1]
« previous next »