TURBO TO MANIFOLD BOOT ( DUCT 1.6 & 1.9 ) TD Model's - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• TURBO TO MANIFOLD BOOT ( DUCT 1.6 & 1.9 ) TD Model's by GEE-BEE on 05 Nov, 2009 18:14
• Do they use the same boot on both motor's ?
  
  Let me know ?
  
  Gee-Bee
• #1 by Andy@React on 10 Nov, 2009 09:11
• it will depend on the turbo wont it? my GTD turbo (K14) flange is bigger than my AAZ turbo (K03) flange
• #2 by GEE-BEE on 10 Nov, 2009 09:28
• AAZ / KO3 1.50 I.D. TO 1.75 I.D.
  
  I have found silicone 5ply 1.50 to 1.87 ( 90 degree )
  
  stock production item at: THERMALFLEX.COM
  
  PART # TFC590-150/187 COST DEALER 34.42
  
  I STAY AWAY FROM THE CHEAP SILICONE PRODUCTS FROM SILICONEINTAKES.COM
  
  I will advise fitment
  
  
  Gee-Bee
• #3 by macka on 10 Nov, 2009 09:42
• what are we looking at for cost?
• #4 by GEE-BEE on 10 Nov, 2009 09:52
• I would  have to purchase five each, than outbound frht 10.50, the length is 6' inches on these so you can cut with a band saw for overall length you require
  
  If you want a pdf catalog, email me at [email protected]
  
  GEE-BEE