-
Feeler :may have a 97 AAZ T-bone for parts
by
the caveman
on 17 Nov, 2008 18:59
-
I have another possiblity of a 97 Jetta TD for parts . Car runs, was t-boned and body is bad anyways. I will part it if i can get enough of it sold. I won't ship a complete motor to the states but can part it to ship. If i can sell the motor, IP , turbo and trans i will buy it. car had 265,000 kms and was very well maintained. thanks
-
#1
by
blackbird82
on 18 Nov, 2008 13:32
-
I am in Winnipeg, how much for the IP shipped to me?
-
#2
by
the caveman
on 18 Nov, 2008 13:41
-
I can't imagine more than $30.
If you do want it i will start to make a list for everything wanted and you'll be first.
-
#3
by
Turbinepowered
on 18 Nov, 2008 15:59
-
Just fishing, but how much would you want for the head, down to 29670?
I wanna get in on this 1.9 head madness.
-
#4
by
Kantdrive55
on 19 Nov, 2008 00:23
-
I would take the cluster out of it.
-
#5
by
TD_Bunny
on 19 Nov, 2008 02:46
-
I won't ship a complete motor to the states
Yeah wouldnt that be a pain!
Not posting to crap on this thread just wanted to tell anyone looking Marc is a great guy to work with and will do what he can get get you what you need. I dont have my motor yet (not his fault stupid EPA) but i would do business with him again. Sorry to hear about the car but good luck to you in your sales.
-
#6
by
the caveman
on 19 Nov, 2008 13:51
-
Just fishing, but how much would you want for the head, down to 29670?
I wanna get in on this 1.9 head madness.
Man i hate UPS.
I got one quote for $70, and another that would be faster but includes brokerage at $180. I would think that i could send it by post for around 60-80 bucks and you may not even have to pay duty.
-
#7
by
the caveman
on 19 Nov, 2008 13:53
-
I would take the cluster out of it.
you are on the list. Thanks.
Everyone :I'm not sure how soon i have to tell him, but he did say he's gone in december so i would imagine i will decide by this time next week.
-
#8
by
vegged-out
on 19 Nov, 2008 21:49
-
I would be interested in the alternator and the whole serp belt setup , pulleys, idler, and bracket for my daughters 1.6td (alternator belts last her about 2000 km )
Michiel
-
#9
by
the caveman
on 19 Nov, 2008 23:11
-
I would be interested in the alternator and the whole serp belt setup , pulleys, idler, and bracket for my daughters 1.6td (alternator belts last her about 2000 km )
Michiel
Alright.
-
#10
by
Turbinepowered
on 21 Nov, 2008 06:15
-
Just fishing, but how much would you want for the head, down to 29670?
I wanna get in on this 1.9 head madness.
Man i hate UPS.
I got one quote for $70, and another that would be faster but includes brokerage at $180. I would think that i could send it by post for around 60-80 bucks and you may not even have to pay duty.
Okay, so I'll be pessimistic and say $90 for shipping, but how much for the head itself from ya? That much again? More? Less?
-
#11
by
the caveman
on 21 Nov, 2008 07:16
-
Oops ,right. I would think $170 should do it.plus the shipping.
-
#12
by
jtanguay
on 21 Nov, 2008 07:32
-
i've been looking for a transmission... you don't happen to have the code do you? how much would you want for it??? it would be to swap into a mk2, but i have a cable shifter... just need the hydraulic clutch bits as well. (although i've heard of some interesting ways of just hooking up the master cyl with the original mk2 pedal...)
thanks
-
#13
by
Turbinepowered
on 21 Nov, 2008 08:03
-
Oops ,right. I would think $170 should do it.plus the shipping.
Mmm, I think I'm out. With the shipping added in that's $260, bit rich for my blood and idle desire right now. We're teetering on the edge of recession down here, don'tcha know!
I don't even have a spare engine appropriate to put it on, so I can afford to keep bargain hunting for a "core" head to rebuild and port/polish.
-
#14
by
the caveman
on 21 Nov, 2008 10:55
-
Oops ,right. I would think $170 should do it.plus the shipping.
Mmm, I think I'm out. With the shipping added in that's $260, bit rich for my blood and idle desire right now. We're teetering on the edge of recession down here, don'tcha know!
I don't even have a spare engine appropriate to put it on, so I can afford to keep bargain hunting for a "core" head to rebuild and port/polish.
I have one that all the valve are bent. The rest of the head is okay. I cpuld strip it down and i'll sell it for $75 plus the shipping would be alot less also, possibly as little as 50 quattloos