Or is it something I will need to come up with?
you could check out kerma TDI.
it's not too hard to make though... just get a piece of steel and cut it then drill some holes, and bingo. you can use the egr line as a template even.
Nice. Wastn sure if it had to be anything special or not.
i might have one? i bought an intake that had one but i welded up the hole because i needed more clearance but i still have the plate left!
Duane
I used a bit of 5mm deep flat bar, cut it to match the shape of the flanges on the egr i removed, drilled it and bolted it straight on to place, piece of cake!
Piece of sheet metal for me. Cut it with some tin snips, filed the edges, drilled a pair of holes and in it went.