Fixmyvw.com

Author Topic: My 1.6td/aaz head and other stuff too.  (Read 89233 times)

Reply #315December 29, 2009, 05:48:38 pm

Smokey Eddy

  • Veteran

  • Offline
  • ***

  • 3468
    • McScrubbins Body Wash
Re: My 1.6td/aaz head and other stuff too.
« Reply #315 on: December 29, 2009, 05:48:38 pm »
lolz-me-arse-off at the part about the drill bit hahahaha
So you reckon I'll still grenade my turbo utilizing my magic waste gate?
I'll make a video, i just need to figure out how im going to fixate my camera inside the car... It would be really cool to have several cameras like in a rally race showing my feet, gear stick, speedo, rpm, front, gauges, rearview mirror and what have you.
Ed
Blacked out mk2 AAZ Jetta RIP. You are missed.
White 1999.5 ALH Golf 2dr. Low & wide. Rammed off the road RIP.
Blue 2009 CR140 Jetta CBEA/CJAA. Malone stage 2. EGR/DPF/Exhaust-valve deletes. 2.5" open exhaust. ADP Turbo swap. 1-stage nitrous kit. THROWN ROD

Reply #316December 30, 2009, 05:52:05 pm

Rabbit on Roids

  • Guest
Re: My 1.6td/aaz head and other stuff too.
« Reply #316 on: December 30, 2009, 05:52:05 pm »
nah, i dont think it will commit suicide till atleast 30 psi boost or so, probably even higher than that tho. probably closer to 40 psi or something. i guess ive ran my turbo to within an inch of its life quite a few times, i guess they start to explode at 35 psi. mines done that lots of times, but i think it was from retarded timing, because i had half the power with 35 psi than i do now with 20 psi.

Reply #317December 30, 2009, 06:27:52 pm

RabbitJockey

  • Veteran

  • Offline
  • ***

  • 5064
  • Personal Text
    America, DUCK YEAH!!!
Re: My 1.6td/aaz head and other stuff too.
« Reply #317 on: December 30, 2009, 06:27:52 pm »
hill folk sent pics of his down pipe with a huge hole in it from the turbine wheel shooting out, but that was on a tdi-m with a t3
01 Jetta TDI 100% stock daily
81 Rabbit:TDI-M ported head, Frank06 cam, PD intake, hybrid T3 turbo, Renault intercooler, Syl20 11mm pump, light weight fw, and yellow California Clutch clutch kit

Reply #318December 30, 2009, 10:15:24 pm

Smokey Eddy

  • Veteran

  • Offline
  • ***

  • 3468
    • McScrubbins Body Wash
Re: My 1.6td/aaz head and other stuff too.
« Reply #318 on: December 30, 2009, 10:15:24 pm »
That's an interesting comment about the retarded timing... i found i got much higher boost with retarded timing but less power... was a lot quieter though...
Ed
Blacked out mk2 AAZ Jetta RIP. You are missed.
White 1999.5 ALH Golf 2dr. Low & wide. Rammed off the road RIP.
Blue 2009 CR140 Jetta CBEA/CJAA. Malone stage 2. EGR/DPF/Exhaust-valve deletes. 2.5" open exhaust. ADP Turbo swap. 1-stage nitrous kit. THROWN ROD

Reply #319December 30, 2009, 11:17:49 pm

foxracer1

  • Authorized Vendor
  • Veteran

  • Offline
  • ***

  • 991
Re: My 1.6td/aaz head and other stuff too.
« Reply #319 on: December 30, 2009, 11:17:49 pm »
When the timing is retarded it creates higher EGTs so it would produce more boost but may not make more HPs. Thats why its fun to have lots of gauges to stare at.
84 4dr Rabbit 1.6 N/A sold to friend
86 Jetta TD getting raced out AHU 02A
98 Jetta TDI Malone tune stg 3
91 S10 305 TPI T56
86 S10 2WD Prerunner project.


Now offering turbo rebuilds. HP or stock. Any turbo you have i can rebuild it for ya.
Reseal injection pumps PM for det

Reply #320December 31, 2009, 03:30:26 pm

Rabbit on Roids

  • Guest
Re: My 1.6td/aaz head and other stuff too.
« Reply #320 on: December 31, 2009, 03:30:26 pm »
That's an interesting comment about the retarded timing... i found i got much higher boost with retarded timing but less power... was a lot quieter though...

my rabbit had tons (almost twice as much) and tons of boost with retarded timing, but driving it was just that, retarded. it wouldnt smoke, it wouldnt get very good mileage, but it sure was fun pegging the 30 psi gauge at the glance of an eye. and like you said, it was quiet. quieter rattle from the engine, and a WAY quieter exhaust note. i put a muffler on when i still had retarded timing, then before i took my engine out of my rabbit, i cut the muffler off to donate to my GTI, and then i took it for one last drive before i broke 2 motor mounts and pulled the motor. that last drive i took it on, it was so ridiculously loud.. just a 2.5 inch straight pipe. i never remembered it being that loud. but that was also after i got the timing alot closer to spec. it starts so much easier being timed well.

Reply #321January 29, 2010, 03:33:12 pm

Smokey Eddy

  • Veteran

  • Offline
  • ***

  • 3468
    • McScrubbins Body Wash
Re: My 1.6td/aaz head and other stuff too.
« Reply #321 on: January 29, 2010, 03:33:12 pm »
SO,

Since im going to be hopefully getting lots of pressure and CFM out of the holset idea... I should increase the break pressure of my injectors yes? they are supposed to be at 155 bar. but i dont have any way of checking that for my self. A shop just told me they were "ok"

Also, am i going over the limits of my engine with this idea?
I'm basically shoving tons of boost down it's throat and attempting to make it breathe as freely as possible to burn as much diesel as is present in the chamber.

I've put a fraction of the money into my engine as other people on here, ARB, Saurkraut, Dave (953Racer), Mike, ect.

The only ... safety catches i have on my engine are new rod bearings... and that's basically it. I can't think of anything else.
oh, and measures to keep the EGT down. IE big exhaust & ported head.
Am i just making a bomb of sorts?
Please let me know if you think this is a REALLY dumb idea.
Ed
Blacked out mk2 AAZ Jetta RIP. You are missed.
White 1999.5 ALH Golf 2dr. Low & wide. Rammed off the road RIP.
Blue 2009 CR140 Jetta CBEA/CJAA. Malone stage 2. EGR/DPF/Exhaust-valve deletes. 2.5" open exhaust. ADP Turbo swap. 1-stage nitrous kit. THROWN ROD

Reply #322January 29, 2010, 03:57:20 pm

Rabbit on Roids

  • Guest
Re: My 1.6td/aaz head and other stuff too.
« Reply #322 on: January 29, 2010, 03:57:20 pm »
i still think the T3 is too big to use with a compound setup.

Reply #323January 29, 2010, 04:40:12 pm

Smokey Eddy

  • Veteran

  • Offline
  • ***

  • 3468
    • McScrubbins Body Wash
Re: My 1.6td/aaz head and other stuff too.
« Reply #323 on: January 29, 2010, 04:40:12 pm »
i still think the T3 is too big to use with a compound setup.

we'll just have to see. can be easily replaced if it doesn't work.
Ed
Blacked out mk2 AAZ Jetta RIP. You are missed.
White 1999.5 ALH Golf 2dr. Low & wide. Rammed off the road RIP.
Blue 2009 CR140 Jetta CBEA/CJAA. Malone stage 2. EGR/DPF/Exhaust-valve deletes. 2.5" open exhaust. ADP Turbo swap. 1-stage nitrous kit. THROWN ROD

Reply #324January 29, 2010, 07:05:27 pm

RabbitJockey

  • Veteran

  • Offline
  • ***

  • 5064
  • Personal Text
    America, DUCK YEAH!!!
Re: My 1.6td/aaz head and other stuff too.
« Reply #324 on: January 29, 2010, 07:05:27 pm »
what intake manifold do you plan on using?
01 Jetta TDI 100% stock daily
81 Rabbit:TDI-M ported head, Frank06 cam, PD intake, hybrid T3 turbo, Renault intercooler, Syl20 11mm pump, light weight fw, and yellow California Clutch clutch kit

Reply #325January 29, 2010, 07:44:40 pm

Smokey Eddy

  • Veteran

  • Offline
  • ***

  • 3468
    • McScrubbins Body Wash
Re: My 1.6td/aaz head and other stuff too.
« Reply #325 on: January 29, 2010, 07:44:40 pm »
I dunno?
The TDI ALH one?
What else would fit?
The only alternative i can think of is somehow ... making my own runners for the exhaust and getting someone to make me a plenum style intake.
Ed
Blacked out mk2 AAZ Jetta RIP. You are missed.
White 1999.5 ALH Golf 2dr. Low & wide. Rammed off the road RIP.
Blue 2009 CR140 Jetta CBEA/CJAA. Malone stage 2. EGR/DPF/Exhaust-valve deletes. 2.5" open exhaust. ADP Turbo swap. 1-stage nitrous kit. THROWN ROD

Reply #326January 29, 2010, 08:46:01 pm

rallydiesel

  • Veteran

  • Offline
  • ***

  • 1880
Re: My 1.6td/aaz head and other stuff too.
« Reply #326 on: January 29, 2010, 08:46:01 pm »
That's why vnt turbos are so great. None of the headaches of matching compound turbos and plumbing issues.
2006 Jetta TDI - gtb1749v, Malone 2, Frank's Titan 2 cam, VR6 clutch....
1991 Jetta TD - sold :(
2001 Golf TDI - Son's
1981 Rabbit - BEW tdi swap project

"ONCE YOU GO CLACK, YOU NEVER GO BACK"

Reply #327April 16, 2010, 11:54:08 pm

Smokey Eddy

  • Veteran

  • Offline
  • ***

  • 3468
    • McScrubbins Body Wash
Re: My 1.6td/aaz head and other stuff too.
« Reply #327 on: April 16, 2010, 11:54:08 pm »
New Stuff! :D


I will undoubtably be asking what some of these gaskets and copper washer things are for in the very near future
Ed
Blacked out mk2 AAZ Jetta RIP. You are missed.
White 1999.5 ALH Golf 2dr. Low & wide. Rammed off the road RIP.
Blue 2009 CR140 Jetta CBEA/CJAA. Malone stage 2. EGR/DPF/Exhaust-valve deletes. 2.5" open exhaust. ADP Turbo swap. 1-stage nitrous kit. THROWN ROD

Reply #328April 17, 2010, 01:59:09 pm

8v-of-fury

  • Guest
Re: My 1.6td/aaz head and other stuff too.
« Reply #328 on: April 17, 2010, 01:59:09 pm »
NOICE!

Reply #329April 17, 2010, 09:26:18 pm

Smokey Eddy

  • Veteran

  • Offline
  • ***

  • 3468
    • McScrubbins Body Wash
Re: My 1.6td/aaz head and other stuff too.
« Reply #329 on: April 17, 2010, 09:26:18 pm »
Heatercore just blew up inside my car today...
adding that to the list. sighhhhhh
and the appropriate hoses
siiiighhhh
Ed
Blacked out mk2 AAZ Jetta RIP. You are missed.
White 1999.5 ALH Golf 2dr. Low & wide. Rammed off the road RIP.
Blue 2009 CR140 Jetta CBEA/CJAA. Malone stage 2. EGR/DPF/Exhaust-valve deletes. 2.5" open exhaust. ADP Turbo swap. 1-stage nitrous kit. THROWN ROD

 

S-PAutomotive.com