Author Topic: what size pump head ? (Read 2358 times)

the caveman · « **on:** August 27, 2008, 09:45:18 am »

I need to find out what size pump.head would be on a 1.9 l NA diesel. i hope you guys in europe can help.

Powered by Spearco · « **Reply #1 on:** August 27, 2008, 01:26:53 pm »

I've seen on 1.9 na's 8mm and 9mm heads. Don't know if that stock or what.
Josh

snakemaster · « **Reply #2 on:** August 27, 2008, 03:35:35 pm »

the two that i have striped were 9mm 1.9 na done the gov mod and turned up the fuel and it would pass a stock 1.6 td :lol:

the caveman · « **Reply #3 on:** August 27, 2008, 04:35:18 pm »

well i just installed a 10 mm . I had bought an 11mm ,but my guy believes it also needed a TDI [ or similar ]camplate to work. As i am pressed for time i had to settle for the 10mm. But the fact that they came with a 9 mm then i should be good to go. Mine did come with an 8mm head and other governor bits to keep the fueling limited.

jimfoo · « **Reply #4 on:** August 27, 2008, 06:27:31 pm »

You don't want a TDI cam plate in an IDI motor.