Author Topic: WANTED - 1.6 TD boost PIN (Read 4274 times)

blackdogvan · « **on:** May 13, 2008, 03:25:40 pm »

Looking for a 1.6l boost pin to upgrade my 1.9l AAZ.

thanks!!!!

jimfoo · « **Reply #1 on:** May 13, 2008, 06:26:45 pm »

You can use a Cummins pin as well. just be sure to use the 1.6 or Cummins spring with the pin. On the Cummins spring, I had to open the bottom up just a little so it would fit over the spring retainer.

blackdogvan · « **Reply #2 on:** May 14, 2008, 09:30:27 am »

Anyone have a link to a post with the Part number? (or just the #?) Cummins parts are easy for me to find, Rover TD parts, not so much.

jimfoo · « **Reply #3 on:** May 14, 2008, 10:34:40 am »

I didn't get a #, just bought a pin and spring from the local rebuilder. Whatever it was he had on hand. I don't imagine there aren't too many stock variations

RabbitGTDguy · « **Reply #4 on:** May 14, 2008, 11:17:56 am »

Jim,

I am surprised that a stock Cummins pin just fit in your LDA on the 1.6 pump...
My cummins pump in order to utilize the stock cummins pin in the VW LDA required disassembly of the LDA and removal of the stock boost pin sleeve and swapping in the Cummins sleeve as well (as the diameter of the cummins pin is slightly larger in my case). Maybe the stock AAZ pump runs this "large" sleeve for the boost pin?

Joe

jimfoo · « **Reply #5 on:** May 14, 2008, 02:01:55 pm »

I don't have a 1.6, I have an AAZ, um I mean M-TDI.