« previous next »
Pages: [1]

Author Topic: cruise cuts out  (Read 3861 times)

April 24, 2008, 06:26:38 pm

600K

  • Guest
cruise cuts out
« on: April 24, 2008, 06:26:38 pm »
the cruise control on my 94 cuts out erratically,  sometimes will reset, sometimes not.  I have tested the vacuum and circuits as per the bently manual, all checks out well.  any ideas?
Logged
Reply #1April 24, 2008, 09:21:48 pm

zukgod1

  • Veteran
  • Offline
  • ***
  • 2817
cruise cuts out
« Reply #1 on: April 24, 2008, 09:21:48 pm »
Replace the control box if everything else checks out good.
Logged
dan

99 Golf TDI (now CNG powered) , 82 TD Caddy
Reply #2April 25, 2008, 07:44:43 am

the caveman

  • Veteran
  • Offline
  • ***
  • 1739
cruise cuts out
« Reply #2 on: April 25, 2008, 07:44:43 am »
Alot of the times either the brake or clutch switch gets out of adjustment and becomes too " sensitive". If you have a meter connect at either one, and it should take at least i inch of pressing at the pedal for the signal to get cut. The stalk with the on/off switch after some time wear also.
Logged
" I'm a vegetarian,not because i love animals, it's because i hate plants"
1970 Type 3 fastback
1972 Renault 12
1971 Super Beetle 140 HP 159 ft lbs
1987 Fox
1989 TD Jetta
1990 Fox
1989 Fox
1998 TDI Jetta
1990 T3 German MIL Transporter 1.9 na Giles super pump
1997 Jetta GLX TDI
Reply #3April 25, 2008, 08:02:51 am

ricosuave

  • Junior
  • Offline
  • **
  • 244
cruise cuts out
« Reply #3 on: April 25, 2008, 08:02:51 am »
go through the diagnostic procedure in the bentley manual

the lines are on a vacuum system, sometimes they need to be changed too

do a search on vwvortex.com forums, there is a how to there
Logged
Now: 00 2dr Golf TDI, 03 Jetta Wagon TDI, 02 2500HD Duramax - :)
Then: 69 SC Transporter, 84 Rabbit GTI, 87 Fox GL, 91 Golf IDI, 96 Passat Wagon TDI, 97 Jetta IDI - :(
"Everything I save by driving diesel I put back due to poor German engineering and crappy Mexican workmanship!"   :P
Pages: [1]
« previous next »