Author Topic: crankshaft sprocket bolt specs? (Read 4562 times)

haybayian · « **on:** December 03, 2007, 05:16:46 am »

Sorry VW friends for asking such a pedestrian question.
My 1.9 TD long block was delivered to me with a crankshaft sprocket but seemingly no bolt to hold it there. How the machine shop managed to force the sprocket in position without a bolt is beyond me.

Does anyone know off-hand the specs of this specific bolt??? I am aware of the thread below on the same subject, i.e 12 point bolts, 19 mm sockets etc. What I need is your advice on the darn bolt, what to buy and where.

Thanks.

Haybayian

myke_w · « **Reply #1 on:** December 03, 2007, 06:21:24 am »

most are one time use only anyway.. stretch bolts.. go to the dealer and buy one.

MikkiJayne · « **Reply #2 on:** December 03, 2007, 06:43:26 am »

For reference it's M14x1.5x47.

VW number is N 905 771 01. It should only be a couple of dollars.

Hth, Mikki x

haybayian · « **Reply #3 on:** December 03, 2007, 07:46:29 am »

Quote from: "MikkiJayne"

For reference it's M14x1.5x47.

VW number is N 905 771 01. It should only be a couple of dollars.

Hth, Mikki x

Thanx Mike & Mikki
I will buy one from the dealer.
Haybayian

rubadubdub · « **Reply #4 on:** December 03, 2007, 05:47:46 pm »

www.vagcat.com has all the part numbers provided you know which bit you're after.

haybayian · « **Reply #5 on:** December 04, 2007, 12:50:44 pm »

Quote from: "rubadubdub"

www.vagcat.com has all the part numbers provided you know which bit you're after.

Thanks,
This seems to be a good orientation for sourcing parts

Haybayian