crankshaft sprocket bolt specs? - Troubleshooting - VWDiesel.net The IDI, TDI, and mTDI source.

• crankshaft sprocket bolt specs? by haybayian on 03 Dec, 2007 05:16
• Sorry VW friends for asking such a pedestrian question.
   My 1.9 TD long block was delivered to me with a crankshaft sprocket but seemingly  no bolt to hold it there. How the machine shop managed to force the sprocket in position without a bolt is beyond me.
  
  Does anyone know off-hand the specs of this specific bolt??? I am aware of the thread below on the same subject, i.e 12 point bolts, 19 mm sockets etc. What I need is your advice on the darn bolt, what to buy and where.
  
  Thanks.
  
  Haybayian
• #1 by myke_w on 03 Dec, 2007 06:21
• most are one time use only anyway.. stretch bolts..  go to the dealer and buy one.
• #2 by MikkiJayne on 03 Dec, 2007 06:43
• For reference it's M14x1.5x47.
  
  VW number is N 905 771 01. It should only be a couple of dollars.
  
  Hth, Mikki x
• #3 by haybayian on 03 Dec, 2007 07:46
• Quote from: "MikkiJayne"

  For reference it's M14x1.5x47.
  
  VW number is N 905 771 01. It should only be a couple of dollars.
  
  Hth, Mikki x

  
  
  Thanx Mike & Mikki
   I will buy one from the dealer.
  Haybayian
• #4 by rubadubdub on 03 Dec, 2007 17:47
• www.vagcat.com has all the part numbers provided you know which bit you're after.
• #5 by haybayian on 04 Dec, 2007 12:50
• Quote from: "rubadubdub"

  www.vagcat.com has all the part numbers provided you know which bit you're after.

  
  
  Thanks,
  This seems to be a good orientation  for sourcing parts
  
  Haybayian