-
#15
by
stewardc
on 04 Nov, 2006 04:30
-
Here's the one on my 1.6TD Bunnytruck. It's a PP pipe and connects to a 2.25" system with a Magnaflow muffler (custom bent by a local shop). The quality and performance improvement are both fantastic.
-
#16
by
935racer
on 04 Nov, 2006 08:51
-
how long would it take to get a ceramic coated pipe to seattle? ill order before monday if it can get here in time
I can send one to the ceramic coater on monday, should be back on wednesday, so it will get shipped out before the end of the week, so you will see it early the week after this.
-
#17
by
2mAn
on 04 Nov, 2006 15:04
-
nice youll probably see an order from me soon... thanks everyone
-
#18
by
935racer
on 04 Nov, 2006 15:06
-
If you want one ceramic coated ASAP, let me know so I can send it to the coater's on monday, I don't usually keep the ceramic coated ones in stock.
-
#19
by
scopefrfd
on 04 Nov, 2006 16:20
-
stewardc love to see more pics of the caddy..especially the headlight/air cleaner area also pics of the fuel filter bracket.
-
#20
by
veeman
on 04 Nov, 2006 22:35
-
Nice looking truck! Is that a G60 valvecover? What breather setup is that you're running? Sorry for the hijack...the downpipes look great.
-
#21
by
stewardc
on 05 Nov, 2006 04:48
-
Nice looking truck! Is that a G60 valvecover? What breather setup is that you're running? Sorry for the hijack...the downpipes look great.
Yes, that is a powdercoated G-60 cover and a homemade vent system with a stainless pot scrubber pushed into the Valve cover end of the tube.
-
#22
by
Fisher
on 05 Nov, 2006 18:15
-
I've bought two Jetta TD's in the last couple years where the support bracket was missing or the bolts missing and the Turbo Center sections were cracked in half right at the place where the Turban Housing secures to the Center Section. I have to believe this is due to lack of support.
-
#23
by
935racer
on 05 Nov, 2006 18:52
-
I've bought two Jetta TD's in the last couple years where the support bracket was missing or the bolts missing and the Turbo Center sections were cracked in half right at the place where the Turban Housing secures to the Center Section. I have to believe this is due to lack of support.
Nope not from that, the center section recieves no torque from the downpipe, its on the otherside of the turbine, there is no pressure on it.
There is absolutely ZERO need for a support bracket for a properly welded downpipe made from 18g or thicker material (mine are made from 16g) I have had zero cracks or failures from my downpipes.
-
#24
by
Fisher
on 06 Nov, 2006 06:57
-
I'm convinced.
-
#25
by
935racer
on 06 Nov, 2006 22:58
-
-
#26
by
2mAn
on 07 Nov, 2006 16:29
-
nice pics!
just ordered mine today, cant wait to get it
