-
#45
by
monomer
on 22 Apr, 2009 20:17
-
10 sets of rods? i think us off the wall build guys are kinda screwed, since most people are running 1.6 engines.
as if building a 1.6 isnt obscure enough...
-
#46
by
TurboJ
on 24 Apr, 2009 02:16
-
Pauter has 1.6 IDI rods on their catalog...
-
#47
by
subsonic
on 24 Apr, 2009 06:05
-
The price is very high though.........
I will attempt to contact the people from this link again and find out where they are with the planned production of these rods.
-
#48
by
ukcaddy
on 25 Apr, 2009 09:41
-
your on about pete from intengineering.com hes a cool guy that knows his stuff and his rods are very very good for price.
i have a set in my corrado 20v and that has 487bhp i know of lots of other people using these rods .
we need some concrete numbers on people who are interested in buying a set of rods ?
im in for a set ukcaddy 1.6td rod set
and i know a fair few people would want them in uk ?
just one quick thing what about these any one tried them or chinese poo poo ?
VW Golf Turbo Diesel 1.6L Connecting Rods Conrod Pleuel item number
item number 170111884888
-
#49
by
rallydiesel
on 25 Apr, 2009 13:30
-
I tried contacting them about shipping but got no response.
-
#50
by
ukcaddy
on 25 Apr, 2009 16:19
-
I tried contacting them about shipping but got no response.
who do you mean ebay or intengineering ??
if you mean the ebay 1.6td h-beam rods advert i tried to, did not hear anything.
i looked back though the guys feedback and contact people who had left good feedback on these rods but did not hear from them either !
-
#51
by
rabbid79
on 22 May, 2009 23:35
-
I tried calling Intengineering on Friday hoping that having a local member call might help persuade them, but Pete wasn't available. Does anybody know what the latest is on these rods? I'm getting close to needing them.
-
#52
by
Rabbit on Roids
on 23 May, 2009 11:07
-
i want a set of these if they ever get forged from anything besides unobtanium.
-
#53
by
rabbid79
on 27 May, 2009 09:21
-
-
#54
by
Rabbit on Roids
on 27 May, 2009 09:33
-
looks like you would have to bore the small end out. it doesnt look big enough to accept a 24mm bushing. could be wrong, but i just dunno if it can be bored.
-
#55
by
rabbid79
on 27 May, 2009 18:23
-
I was thinking the bushing would be fitted to the piston itself. The piston hole would be adapted to 22mm, and then this rod and pin could be used like they are. Boring out the small end on the rod looks like it could be made to work too. Unfortunately, these are about $200/ea. and I need 5.
BTW, I called Integrated Engineering today and talked to Pete. He said that they're doing TDI rods right now. They'll be available in about a month. They are considering doing G60 and custom rods toward the end of the summer. Not planning on doing any 1.6 rods at this point however. He said they would do the 1.6 rods but they wouldn't do less that 50 SETS. Yes, 200 rods minimum according to Pete. At this point, kind of looks like we're SOL.
I didn't mean to hijack this thread for a group buy, or step on anyones toes. These guys are somewhat local, and I need rods ASAP, so I thought I'd give them a call to see what was up.
-
#56
by
RabbitJockey
on 28 May, 2009 14:23
-
man 50 sets would be a big group buy, i am curious about the bushing idea, i mean those 8vs can take some serious power.
-
#57
by
cyrus #1
on 28 May, 2009 14:56
-
G60 rods use the same big end and center to center distance as ours, correct? I wonder if we could convince Pete to make a dual purpose rod.
If the rods were made to accept a 24mm wrist pin bushing you could always have undersized bushings made to get them down to 22mm. Then all you would need to do is specify which bushing size you want. I'm sure he would have no troubles selling 50 sets in this fashion.
