-
Blkboostedtruck is having a group buy nozzels! call Sean
by
blkboostedtruck
on 12 Oct, 2008 12:21
-
HEY GUY'S I'M GONNA HAVE YOU GUYS CALL SEAN YOUR SELVES!
CONTACT INFO IS ON PAGE 3 I WILL PUT IT IN THIS FIRST THREAD
EXPLANATION IS ON PAGE 3! THANKS Duane
if anyone is interested in new nozzels the more we buy the less they are!
261 72 available
265 70 available
293 12 available
314 12 available
Blkboostedtruck= 12nozzels
SR Heer = 8 nozzels
Foxracer1= 8 nozzels
familydiesel= 8 nozzels
cyrus#1 =8 nozzels
19bucks for individual nozzels
if i have an order for more then 20 it drops to 18bucks per nozzel
and if more then 40 in a order it drops more per nozzel
so if anyone interested i'd like to place an order this week!
those listed above are what in stock now!
well let me know!
thanks Duane
Sean 1-919-828-5221 say your in Duane's group buy in wisconsin!
(those are the magic words)
Hessian American Imports
717 A chappell Dr.
Raleigh, NC. 27606
[email protected]Blkboostedtruck's contact info.
K. Duane Keaton
4275 S. 35th. st.
Greenfield, Wi. 53221
414-840-1395 cell
-
#1
by
SR Heer
on 12 Oct, 2008 12:33
-
Duane,
I will be wanting to get a set of nozzles for my 1.6GTD engine - what do you recommend and how much?
Also will be wanting to get a set of nozzles for AAZ 1.9 TD dual rate injectors - what do you recommend for these and how much?
What do you charge to pop test and adjust these to say 165 BAR and are the dual rate injectors any more difficult to set up than the single rate ones?
Thanks
-
#2
by
blkboostedtruck
on 12 Oct, 2008 13:37
-
Duane,
I will be wanting to get a set of nozzles for my 1.6GTD engine - what do you recommend and how much?
Also will be wanting to get a set of nozzles for AAZ 1.9 TD dual rate injectors - what do you recommend for these and how much?
What do you charge to pop test and adjust these to say 165 BAR and are the dual rate injectors any more difficult to set up than the single rate ones?
Thanks
261for GTD motor will work great! price determines on how many buy during the group buy so right now 19bucks per nozzel i charge 75bucks to rebulld 4 injectors!
it's alot of work! if your pump is stock then 155bar is fine for pop pressure
i cannot do dual spring injectors as of yet! you would have to send those off to giles or a injection shop! special equipment to do those settings on dual spring injectors!
Duane
261 work fine in AAZ injectors
-
#3
by
blkboostedtruck
on 14 Oct, 2008 09:52
-
bump
-
#4
by
foxracer1
on 15 Oct, 2008 07:46
-
I would be interested in some GTD probably at least 8.
-
#5
by
Familydiesel
on 15 Oct, 2008 09:55
-
Hi Duane,
If I understand right, would the 261's work for my 85 1.6 td? If so, I would take 4. I might be persuaded to take 8 if it would make a price difference.
Oh, let me know if you are including me in the count, and when you will need the money etc.
Greg
-
#6
by
foxracer1
on 15 Oct, 2008 10:20
-
What are the options? What 3 are they? GTD, AAZ, and factory?
-
#7
by
blkboostedtruck
on 15 Oct, 2008 10:38
-
What are the options? What 3 are they? GTD, AAZ, and factory?
i'm waiting for info that tells what the #'s mean they have to do with the spray pattern as soon as i get it i'll post it!
and i'll start a list in my first thread on who's buying what!
so go ahead and state how many and what size you want ?
shipping should be 5bucks extra to your total cost
i'll P.M. everyone later for thier shipping info!
Duane
-
#8
by
zukgod1
on 15 Oct, 2008 11:08
-
This is a good deal and I've already bought 4 but I couldn't wait for the GB to happen, I need injectors now.
Better pony up if you think there is even a slight chance you are going to rebuild your injectors within the next 2 years. You can always sell the tips down the road if you don't use them.
-
#9
by
foxracer1
on 15 Oct, 2008 13:47
-
I'd like larger ones but just having new ones will be good. Let me know what you can get when you find out.
-
#10
by
Smokey Eddy
on 15 Oct, 2008 16:44
-
-
#11
by
blkboostedtruck
on 15 Oct, 2008 17:27
-
I'm just waiting on the table. I'm interested. I have mercedez nozzles from this site
http://www.veg-injection-service.com/store/index.php?main_page=product_info&cPath=6_8&products_id=29
I have had good results with these so i figured i'd post the link in a related post.
Are the nozzles you're getting similar Duane?
Sweet deal if this goes through. I wonder if you could do the same with glow plugs or entire injectors? :roll: :wink:
i've seen that site and what scares me is that i cannot see part # nor a bosch logo on the injectors pictured in that link! typical sign of Chinese knock offs!
i have Dan's (zukgod1) injectors here for a repop job and you guys would need to ask him where he got them and how long he used them?
because the nozzels are junk! leak bad! will not hold and have the worse spray pattern i've ever seen! i've threw away old bosch nozzels that had hundreds of thousands of miles that were better then these!
these nozzels i get come from monarch witch is from germany !
the guy i deal with goes to germany alot! his wife has family there!
also this is the same guy i did the injector shim group buy with!
anybody is welcome to his contact info ! he's a very nice guy and has not bull***ted me at all! and he will stand by his product and i can vouch for that!
I have high standards and anything i deal with has to meet my expectations because i'm rough on my equipment and it's gotta last!
and i been into VW's since 1986 when i bought my first VW ("66 sqareback type 3) witch i still have to this day! who elso do you know that has kept their first car over 30years? now thats devotion!
Duane
-
#12
by
blkboostedtruck
on 15 Oct, 2008 18:02
-
I'd like larger ones but just having new ones will be good. Let me know what you can get when you find out.
I added some 314 to the list i forgot to add at first there is 12 available currently!
me personally i'm getting some used 308 from him i wish he had them new!
but beggers can't be choosy
Duane
-
#13
by
cyrus #1
on 15 Oct, 2008 23:09
-
I'd like larger ones but just having new ones will be good. Let me know what you can get when you find out.
x2. I will be checking back regularly. Have you heard anything more about what the part #'s represent?
Cody
-
#14
by
blkboostedtruck
on 15 Oct, 2008 23:33
-
i've started a list for a count so we can get an idea where were at!
let me know if i have the correct amounts by your names?
as soon as i get the info then once you guys know exactly the one's you want ! and i'll add the part #'s to your names! anybody else want on the list?
nows the time!
thanks Duane