View full version: IDI Engine
  1. Video of First start up on a brand new motor.... what gives! (WITH VIDEO)
  2. How much boost pressure should my 1.6 TD have?
  3. turbo advice for my build!
  4. Vacuum Pump AAZ
  5. Lift pump noise and added power?
  6. IP fuel leak
  7. replacement clock for the Caddy
  8. Delivery valves differences
  9. Oil Temp Sending unit (electric)
  10. 1.6l Head Identification
  11. Ko3 on 1.6
  12. Exhaust mani flip, who's done it?
  13. Is this a W terminal alternator?
  14. 1.6 turbo pump - or not??
  15. Turbo choice for 1.6td
  16. Upgrading fuel filtration on an IDI VW
  17. Hylomar on a HG, finger or brush application ok?
  18. headbolts and headgaskets
  19. Possible to install intermediate shaft pulley backwards?
  20. Fitment of Exhausts
  21. gt15 on a 1.6td
  22. The Parts Place
  23. VW IDI Industrial / Marine engines
  24. Pitted water pump flange on block - remedy?
  25. Practically free and Pretty awesome BOV Block Off Plate
  26. Replacing IM shaft bearings - WITH BALL BEARINGS?
  27. Tips for Installing New Head?
  28. Which way to turn adjustable IP pulley for advance?
  29. identifying gtd pump
  30. Changing valve stem seals, head on car
  31. 1.6td question?
  32. First TD winter, running cool
  33. Final word on lowered injector pressures on a td..
  34. engine slow to warmup 92 Ecodiesel
  35. AAZ Piston pin diameters
  36. Wastegate Actuator for manual vane control
  37. Was freeze-plugs, now head scratches...
  38. tach question gasser vs diesel
  39. How much oil on turbo is too much?
  40. Harbor Freight is almost awesome sometimes..
  41. caddy cluster wiring
  42. Did Canadian 81-84 Caddy come with tachs?
  43. K14 or K24 - help me decide
  44. 1.9d dies when running.
  45. Compound turbos
  46. Rough idle/vibration
  47. injector removal problem when car has N/A pump?
  48. cold start question
  49. Governor shaft seal: tips & tricks?
  50. 0-60 N/A Diesel