View full version: IDI Engine
  1. question on crankshaft pulleys
  2. 1.9NA head off; things to check or do before re-assembly?
  3. AAZ loses power at 3KRPM (x-post from Samba)
  4. rover boost pin springs
  5. Is this an A/C or non A/C setup?
  6. BAE Turbo Kit - Non Intercooled - Loss Of Power When Heat Soaked
  7. Canadian GTD conversion project
  8. what happened to quotes?
  9. Preference and/or best fit for Mk2 intercooler.
  10. questions changing water pump on Mk2 with AC and power steering
  11. MK2 rear motor mount - solid to g60/hydro?
  12. looking for CAT oil and fuel filter for my 84 td.
  13. Gasser oil pan on 1.6 n/a?
  14. while cranking to bleed air from injector lines, engine started (with no glow)
  15. oil pressure fluctuations
  16. 1.6 NA pump on 1.9L NA engine- Timing?
  17. Headgasket blown and blowby... related ?
  18. changing coolant flange
  19. READ THIS FIRST - FAQ Quick guide for commonly asked questions
  20. mk2 diesel 3 belt setup alternator belt upgrade
  21. 1.6 GTD smoking like a locomotive
  22. IP problem
  23. Any aftermarket cruse control suggestions - AAZ in Vanagon?
  24. External Oil Cooler - What One?
  25. WAIC Intercooler schematic
  26. 1.6 IDI intakes
  27. Clear fuel line size
  28. AAZ Serpertine belt won't fit
  29. AAZ help! Quantum turbo T3
  30. rebuild now leaks?
  31. 85 TD jetta (aka The DADA), First rebuild and intro
  32. Who's built a powerhouse 1.6TD?
  33. Vacuum pump o-ring?
  34. Alternator Question/Problem
  35. plug for oil return on back of AAZ block
  36. fresh rings this weekend...startup/breakin recomendations
  37. Dealer exploded view diagram.
  38. Coolant temp sensor
  39. Caddy trip odo no worky
  40. Tallest 5th gear possible
  41. speakers for the Caddy
  42. Caddy spare unused wire from engine to cabin?
  43. Window Seals/rubber from Nash Importers
  44. vacuum pump help
  45. Vacuum pump information needed.
  46. 1.5 burning oil ?
  47. Painting Exhaust
  48. Another IDI head cutaway
  49. back from the dead.hillfolk is back yall mk2 coop build
  50. Deciding on parts for my turbo setup