View full version: IDI Engine
  1. "Smokey" adiabatic IDI design
  2. hylomar
  3. Looking for 110-120bhp from GTD do-able or need Giles?
  4. Cheap BOV Block Off Plug
  5. I think I found one of Prothe's suppliers
  6. ARP studs for head,roads&cranckshaft
  7. 1.6 hydro lifter in 1.6 mechanical car?
  8. Lets have a muffler thread
  9. Source for injection pump throttle bushings
  10. injection pump timing for aaz adjustable pulley
  11. Need help with idle
  12. Downpipes, anyone interested?
  13. 1.6 with Eaton M45
  14. 1.7 KY engines?
  15. Any running propane bi-fuel setup ?
  16. Rear Bearing Failures
  17. 1.9D pump install / injector line issues
  18. Turbo Choices
  19. Battery Sizing
  20. Engine stalled in a cloud of white smoke?
  21. Valve seals tubes
  22. Valve guide clearance? Experts needed
  23. car runs too cool...SOMETIMES
  24. 1991 Golf 8v gasser to 1.6TD swap!
  25. Head Gasket Replacement?
  26. AAZ Dowel Crank fix now no start
  27. Custom 2.5 exhaust design question
  28. Coolent Flow Problem
  29. Different Prechambers PIC
  30. AFN?
  31. logistics of running a Giles'd TD pump on a NA?
  32. piston projection too high on one cylinder
  33. AAZ knocking/timing
  34. Turbo I found, is it something I want? Garrett T3
  35. Got an engine question turbo engines
  36. Dawes valve question
  37. Stretch (torque to yield) Bolts on 1.6NA
  38. Oil pump pickup interference with 1.6td oil pump on an n/a pan.
  39. Two 1.6L mech head rebuild questions
  40. Swain Tech is GOOD stuff....
  41. Operating oil pressure
  42. IP Shaft Seals
  43. I need a straight answer! How much boost is safe???
  44. Almost ready to swap transmissions 4sp to 5sp
  45. the fuel filter!
  46. Xtreme 4x4 and Performance Diesel Injection
  47. AAZ governor mod?
  48. Trubo hot side problem
  49. audi 5000 diesel and a k26?
  50. Performance cam for mechanical heads