-
Golf TD more power required - options?
by
nogama3
on 08 Aug, 2007 10:46
-
-
#1
by
zaprzal
on 08 Aug, 2007 10:48
-
do you already have 1.6td boost pin? what turbo do you use?
-
#2
by
nogama3
on 08 Aug, 2007 15:27
-
using the original 1.9 pin and i beleive that its a kkk turbo.
-
#3
by
bert
on 08 Aug, 2007 15:42
-
Nogama,come over to halesowen mate,i will take you for a blast in my AAZ TD mk1 golf,no intercooler,and its rapid,i just altered the aneroid pin :wink:
Bert
-
#4
by
nogama3
on 08 Aug, 2007 15:47
-
Bert, I'll have to do that mate...
-
#5
by
zaprzal
on 08 Aug, 2007 15:51
-
change boost pin for 1.6td one and check what turbo do you have kkk k03 or k14
-
#6
by
nogama3
on 09 Aug, 2007 03:53
-
ok guys, bit of a thick question but where is this pin located and how easy is it to change it over, i take it its from a mk2 golf.
is this pin the same as mentioned by bert and zaprzal?
thanks
-
#7
by
zaprzal
on 09 Aug, 2007 04:01
-
-
#8
by
nogama3
on 09 Aug, 2007 06:48
-
very impressive pics.
next questions:
how do i go about changing this pin?
from which vehicle do i get this pin from?
is it a diy job?
-
#9
by
zaprzal
on 09 Aug, 2007 06:53
-
yes it is 100% diy
get one from 1.6td or machine yours.
-
#10
by
nogama3
on 09 Aug, 2007 08:20
-
sorry to be a pain in the *ss, from which part of the engine bay do i remove this part from?
fuel pump or somewhere else?
thanks
-
#11
by
zaprzal
on 09 Aug, 2007 08:42
-
top of pump
-
#12
by
burn_your_money
on 09 Aug, 2007 09:09
-
-
#13
by
zaprzal
on 09 Aug, 2007 09:10
-
What is the green bar represent in this picture?
I think it's fuel dose
-
#14
by
con
on 09 Aug, 2007 10:05
-
wow those pictures are really helpful. Ok so before you take the pin out you mark where it is so if you get lost you can return to stock?
Then is it just a case of turning the pin 180 degrees and putting it back?
