Author Topic: how to build injector tester or where to get one? (Read 1896 times)

knowtwodrugs · « **on:** June 20, 2007, 07:07:59 am »

I saw one on Ebay a few weeks ago, I should've grabbed it up when I had the chance. Does anyone know if there's a how to or any companies that make them?

Vincent Waldon · « **Reply #1 on:** June 20, 2007, 10:26:33 am »

Having built one myself let me add my voice to the chorus of warnings you'll find in that post:

WARNING WARNING WARNING: you are dealing with extremely high pressures. Pressures that can maim, blind, and kill.

- use only high pressure hydraulic fittings throughout. If you're in the plumbing isle you're in the wrong place.
- wear safety equipment at all times... goggles and gloves. Diesel at that pressure can penetrate skin very easily, and often amputation is the only cure.
- at that pressure diesel is often a fine mist and highly flamable (duh!)... not a good place to be puffing on a stogie.

WARNING WARNING WARNING: you are dealing with extremely high pressures. Pressures that can maim, blind, and kill.

bevboyy · « **Reply #2 on:** June 20, 2007, 10:48:05 am »

This is truly worth a sticky :wink:

biojetta · « **Reply #3 on:** June 20, 2007, 08:27:28 pm »

I have a factory built one (meaning not homemade) in my garage. Haven't had time lately to use it though.