S-PAutomotive.com

Author Topic: ARP Part Numbers  (Read 16329 times)

April 26, 2007, 10:12:29 pm

subsonic

  • Veteran

  • Offline
  • ***

  • 1836
ARP Part Numbers
« on: April 26, 2007, 10:12:29 pm »
ARP part #s
                                                                      
Head Studs..........................251-4701 (yes, the catalog will show them as being for a Ford Cosworth Sierra/Escort!)                 
Main Studs...........................204-5402                    
Con Rod bolts 1.6 and 1.7......104-6002                  
Trans ring gear bolt kit 020 ...204-3001                      
Oil pump bolts.......................661-1014                    

Hope this helps
Jim

Quote
The head studs are the ones that were reccommended on this site. They should fit both 1.9 and 1.6. Correct me if I am wrong.
Same deal with the main studs. Got the info from here.
Con rod bolts, I sent my rods to ARP for them to check and find correct replacement size. This is what they reccommend. I would have sent in 1.9 rods but no one sent me any. I will pass along my contact info at ARP if someone wants to send some. These rod bolts are for the 1.6 and 1.7. I was told they offered about an additional 20,000 psi of strength and a much greater shear strength. I do not know if they will fit a 1.9
The trans ring gear bolt kit is for the 020 tranny's.
The oil pump bolts are direct replacement for the bolts out of my pump. I do not know if these are the same size as the newer 36mm pump people are talking about here on the site. Anyone know if the 36mm uses different size bolts?
All above refer to IDI.  The oil pump was from mid to late 80's hydro TD.

A new style of headstuds are available Click here for more info
« Last Edit: November 26, 2010, 06:30:56 pm by Vincent Waldon »


2009 Jetta TDI Loyal edition, 6-spd. 16V 2.0CR


1985 VW Golf 5-spd, 4-door, 1.6NA  Bought from orig. owner in Savannah with 42,000 miles.
"Making the jump NA to TD" slow but sure.

1980 VW Rabbit LS 5-spd, 4-door 1.6NA almost 450,000miles  RIP

Reply #1April 26, 2007, 11:42:15 pm

foxracer1

  • Authorized Vendor
  • Veteran

  • Offline
  • ***

  • 991
ARP Part Numbers
« Reply #1 on: April 26, 2007, 11:42:15 pm »
finally some concrete numbers

Thanks!  :D
84 4dr Rabbit 1.6 N/A sold to friend
86 Jetta TD getting raced out AHU 02A
98 Jetta TDI Malone tune stg 3
91 S10 305 TPI T56
86 S10 2WD Prerunner project.


Now offering turbo rebuilds. HP or stock. Any turbo you have i can rebuild it for ya.
Reseal injection pumps PM for det

Reply #2April 29, 2007, 10:38:07 pm

jtanguay

  • Veteran

  • Offline
  • ***

  • 6879
ARP Part Numbers
« Reply #2 on: April 29, 2007, 10:38:07 pm »
what are these numbers for? 1.6 & 1.9's non TDI?


This is how we deal with porn spammers! You've been warned.

Reply #3December 09, 2007, 04:47:49 pm

dillenger1

  • Veteran

  • Offline
  • ***

  • 777
ARP Part Numbers
« Reply #3 on: December 09, 2007, 04:47:49 pm »
Is it true there are two seperate lengths?Somewhere i heard you need to use a spacer in some cases.You sussposed to be able to tell by a c or s cast number.
Cummins 4bta- 85 dodge prospector short bed
28 mpg!!and i can pull down a house!
1.6td in toyota pickup
10mm head ,t3 intercooled.

Reply #4December 09, 2007, 11:27:17 pm

subsonic

  • Veteran

  • Offline
  • ***

  • 1836
ARP Part Numbers
« Reply #4 on: December 09, 2007, 11:27:17 pm »
Quote from: "dillenger1"
Is it true there are two seperate lengths?Somewhere i heard you need to use a spacer in some cases.You sussposed to be able to tell by a c or s cast number.


Which part are you asking about?
2009 Jetta TDI Loyal edition, 6-spd. 16V 2.0CR


1985 VW Golf 5-spd, 4-door, 1.6NA  Bought from orig. owner in Savannah with 42,000 miles.
"Making the jump NA to TD" slow but sure.

1980 VW Rabbit LS 5-spd, 4-door 1.6NA almost 450,000miles  RIP

Reply #5December 23, 2007, 08:59:18 pm

dillenger1

  • Veteran

  • Offline
  • ***

  • 777
ARP Part Numbers
« Reply #5 on: December 23, 2007, 08:59:18 pm »
head bolts
Cummins 4bta- 85 dodge prospector short bed
28 mpg!!and i can pull down a house!
1.6td in toyota pickup
10mm head ,t3 intercooled.

Reply #6December 28, 2007, 12:59:42 am

subsonic

  • Veteran

  • Offline
  • ***

  • 1836
ARP Part Numbers
« Reply #6 on: December 28, 2007, 12:59:42 am »
I am not sure about that.  These numbers are for studs though.
2009 Jetta TDI Loyal edition, 6-spd. 16V 2.0CR


1985 VW Golf 5-spd, 4-door, 1.6NA  Bought from orig. owner in Savannah with 42,000 miles.
"Making the jump NA to TD" slow but sure.

1980 VW Rabbit LS 5-spd, 4-door 1.6NA almost 450,000miles  RIP

Reply #7January 03, 2008, 08:46:03 am

lord_verminaard

  • Veteran

  • Offline
  • ***

  • 1080
ARP Part Numbers
« Reply #7 on: January 03, 2008, 08:46:03 am »
What about TDI head studs?

Also, do any of the others, (main, rods, etc) apply to the TDI?  I know it's been discussed before but it's too many posts ago....  :P

Brendan
81 Scirocco 'S -->Soon to be m-TDI
93 Corrado SLC VR6
'86 Golf N/A Diesel  -->Wife's car
1990 Audi CQ
05 New Beetle PD TDI


"I am a man, I can change... if I have to.... I guess....."

-Red Green

Reply #8January 03, 2008, 12:25:46 pm

subsonic

  • Veteran

  • Offline
  • ***

  • 1836
ARP Part Numbers
« Reply #8 on: January 03, 2008, 12:25:46 pm »
No idea.    I contacted ARP directly for my questions.  I will try and look up the guy's contact info so you can get it right from the horses mouth.
2009 Jetta TDI Loyal edition, 6-spd. 16V 2.0CR


1985 VW Golf 5-spd, 4-door, 1.6NA  Bought from orig. owner in Savannah with 42,000 miles.
"Making the jump NA to TD" slow but sure.

1980 VW Rabbit LS 5-spd, 4-door 1.6NA almost 450,000miles  RIP

Reply #9February 02, 2008, 03:36:22 pm

jtanguay

  • Veteran

  • Offline
  • ***

  • 6879
ARP Part Numbers
« Reply #9 on: February 02, 2008, 03:36:22 pm »
I need to buy some con rod bolts for a 1Z TDI as well, and am looking to go ARP if the price is right, otherwise in with the stock ones.

any p/n's appreciated! thanks!


This is how we deal with porn spammers! You've been warned.

Reply #10February 02, 2008, 04:32:45 pm

subsonic

  • Veteran

  • Offline
  • ***

  • 1836
ARP Part Numbers
« Reply #10 on: February 02, 2008, 04:32:45 pm »
The contact info for the tech I used at ARP:

Chris Brawn  1-805-525-1497

He was very helpful and knew what he was talking about.

I was able to get a better price however through  headbolts.com.  If the guy did not have the part he would order it.  He was cheaper than summit.
2009 Jetta TDI Loyal edition, 6-spd. 16V 2.0CR


1985 VW Golf 5-spd, 4-door, 1.6NA  Bought from orig. owner in Savannah with 42,000 miles.
"Making the jump NA to TD" slow but sure.

1980 VW Rabbit LS 5-spd, 4-door 1.6NA almost 450,000miles  RIP

Reply #11February 26, 2008, 02:53:27 pm

subsonic

  • Veteran

  • Offline
  • ***

  • 1836
ARP Part Numbers
« Reply #11 on: February 26, 2008, 02:53:27 pm »
Just to let everyone know, I just picked up a set of ARP main studs for my 1.6 from http://www.headbolts.com

My walking out the door price was 100 bucks.  Cheaper than 118 plus shipping from Summit.
2009 Jetta TDI Loyal edition, 6-spd. 16V 2.0CR


1985 VW Golf 5-spd, 4-door, 1.6NA  Bought from orig. owner in Savannah with 42,000 miles.
"Making the jump NA to TD" slow but sure.

1980 VW Rabbit LS 5-spd, 4-door 1.6NA almost 450,000miles  RIP

Reply #12February 19, 2009, 01:07:24 pm

one_tinted_tail

  • User+

  • Offline
  • *

  • 22
    • http://www.CMLUA.com & www.hourofthetime.com
ARP Part Numbers
« Reply #12 on: February 19, 2009, 01:07:24 pm »
before asking for specific part numbers for 1.6 TD head studs, i searched and found this thread, thanks.

being that ive done things the hard way many times and still do from time to time, I wanted to confirm the validity of the claims posted here. I will provide a cut&paste I just received from ARP.
-----
Brian,

 The part numbers you have provided are not listed for that specific application. I do not have any information regarding if these parts numbers you have given me will work for your application. The head stud kit in question is listed for a Ford Cosworth Sierra/Escort with a 2.0L DOHC engine. The studs in that kit are 12mm x 1.75 and are 5.400 long overall.

 As I mentioned before I would need the calculation sheet to be filled out in order for me to verify if the part numbers you have provided (for the head and main studs) are correct for your application. As for the rod bolts, ring gear bolts and oil pump bolts we would need to know the dimensions of the factory bolts to see if the part numbers you have provided match up.

Regards,

Zac
------

I did get this calculation sheet on a previous email attachment from ARP, however that would require me to have more downtime with the car apart in my garage which im trying to avoid.

Im not saying that the PN's listed above wont work, but as you can read from ARP, confirmed it is not.

So does anyone have proof positive BTDT with corresponding PN's for ARP 1.6TD head studs?

thanks.
My mother named me Brian;

Ive owned many VAG cars but currently have it narrowed down to my 'UrSula' a '95 Audi S6 (dahlback RS2'd & then some) and 'Henryetta' an '85 Jetta TD whose peppy on the veg and is as pretty as her name.

Reply #13February 19, 2009, 01:36:20 pm

zukgod1

  • Veteran

  • Offline
  • ***

  • 2817
ARP Part Numbers
« Reply #13 on: February 19, 2009, 01:36:20 pm »
There are probably over 100 threads of different builds here with people using that part#. Head Studs..........................251-4701

GL with your build Zac.

Start up a thread as you go so we can help where needed. :)
dan

99 Golf TDI (now CNG powered) , 82 TD Caddy

Reply #14March 15, 2009, 05:40:33 pm

Jettagli16v

  • Veteran

  • Offline
  • ***

  • 344
ARP Part Numbers
« Reply #14 on: March 15, 2009, 05:40:33 pm »
Bump to keep the data at the top!
Just bought a set from Summit Racing on friday.
They are up to $130 by now, but still well worth it.

-Brad
Currently: 81 Caddy 1.9 AAZ, 1995 Audi S6, 78 ASI/Riviera camper bus 2.0, 74 THING 1.8 (resto, coming in 2020).

 

Fixmyvw.com