-
Heads shot
by
Cheesetoast
on 19 Apr, 2007 17:07
-
Doh, anyone have a good source for a rebuilt head? my lifter gouged the head. don't know about the bottom end yet, timing got screwed when a piece of metal got in the belt. 1.9td idi
-
#1
by
935racer
on 19 Apr, 2007 17:08
-
I can build you a pretty badass head for $1600, or a still very good one for less. I can fix your crank too if thats what caused it.
-
#2
by
rallydiesel
on 19 Apr, 2007 17:41
-
What exactly does rebuilding a head require? Machining-wise and in terms of new parts? I am considering this too.
-
#3
by
jtanguay
on 19 Apr, 2007 17:49
-
I can build you a pretty badass head for $1600
:twisted:
-
#4
by
Cheesetoast
on 19 Apr, 2007 18:17
-
getting an oem one from vw, $1350 with core, crank didn't cause it, when changing the waterpump, a peice of metal that had fallen on the casing fell into the timing belt area, then i drove 30k. :cry: it sounded a little different but i blew it off, then almost at work, it got way worse. screwed a lifter, the cam, and gouged the head. don't know about the bottom end yet
-
#5
by
935racer
on 19 Apr, 2007 21:53
-
Aaron, why do you call me asking about parts and advice etc and than always end up having Jose make you decisions for you. I've been really helpful to you and I am not a fan of people using me so get bent.
-
#6
by
boosted_diesel_84
on 19 Apr, 2007 22:42
-
What exactly does rebuilding a head require? Machining-wise and in terms of new parts? I am considering this too.
normally, this means new valve guides, depending on mileage and wear, a valve grind depending on how wore, new valves and seats ground, cleaned up, to like new, milled to ensure flatness and smooth sealing abilities and assembled.
i work at a VW/Audi machine shop (Air Cooled Engines Plus) here in Ohio, we can do basic head and engine rebuilding and we do custom work including balancing, port work complete with flow bench numbers to name a few, but if you plan on doing anything performance wise, there are many more options, call John at 419-443-8987 between 10 am-6 pm, mon-fri for more info
-
#7
by
Cheesetoast
on 19 Apr, 2007 22:44
-
Aaron, why do you call me asking about parts and advice etc and than always end up having Jose make you decisions for you. I've been really helpful to you and I am not a fan of people using me so get bent.
It's called shopping around, determining your options.
i'm not using you, i simple decided to go with a factory rebuilt head rather than one locally, nothing against you, the factory one is twice the warrantee, and i trust OEM over aftermarket for reliablity. Even so, i still didn't order the head from Jose, i got it through vm, as they were a better deal for the same product. Don't get me wrong, your price was good, but i simply decided to go oem, jose didn't knock you at all.
and the downpipe? jose offered a better product, thicker piping, better quality piping, simple as that.
I work at a computer store, and we get people all the time asking for quotes and advice, I sell them on our products and tell them why they should buy our products instead of futureshop's. It's just part of the business that not everyone will place the order, that's just the way it is.
On another note, at this time, jose can't find headstuds, if you'd like to quote me on a set, go right ahead, i will shop around as usual though.
-
#8
by
935racer
on 19 Apr, 2007 22:59
-
Jose made a better down pipe? Are you joking, I have seen thats guys fab work, its nothing special, seems to spend his time grinding down welds. Do you know anything about the quality of piping Jose used? I don't think you know anything about mine. I understand shopping around and all but it just seems like I am giving you advice and stuff just so Jose can do it for you instead, and as you probably know Jose has a big problem with me.
-
#9
by
Cheesetoast
on 19 Apr, 2007 23:06
-
oh, and the waterpump, i did that on my own.
-
#10
by
935racer
on 19 Apr, 2007 23:12
-
Ok I'll believe that but I'd like to see what makes Joses down pipe better, because it just seems like that guy is out to get me.
-
#11
by
Cheesetoast
on 24 Apr, 2007 19:04
-
-
#12
by
jtanguay
on 24 Apr, 2007 19:22
-
hmmmm carnage!!!
-
#13
by
rallydiesel
on 25 Apr, 2007 11:58
-
-
#14
by
Cheesetoast
on 25 Apr, 2007 19:01
-
mine is a 1.9.
