« previous next »
Pages: [1]

Author Topic: Looking for place to buy ARP studs/bolts....  (Read 3741 times)

January 05, 2007, 09:14:13 pm

Barry W

  • Guest
Looking for place to buy ARP studs/bolts....
« on: January 05, 2007, 09:14:13 pm »
Looking for a company that stocks the ARP bolts or equivalent. I am rebuilding a 1.6L turbo and looking for cylinder head bolts, and possibly con rod bolts.
Also need to know if the 1.8 8V gas stud kits are the same as the 1.6 turbo diesel?

Thanks!
Logged
Reply #1January 05, 2007, 09:32:21 pm

745 turbogreasel

  • Guest
Looking for place to buy ARP studs/bolts....
« Reply #1 on: January 05, 2007, 09:32:21 pm »
Logged
Reply #2January 05, 2007, 10:39:49 pm

Barry W

  • Guest
Looking for place to buy ARP studs/bolts....
« Reply #2 on: January 05, 2007, 10:39:49 pm »
That looks promising. Thanks!
Logged
Reply #3January 05, 2007, 11:27:49 pm

hillfolk'r

  • Veteran
  • Offline
  • ***
  • 1532
Looking for place to buy ARP studs/bolts....
« Reply #3 on: January 05, 2007, 11:27:49 pm »
all the older 8v's should use the same studs(gas or diesel),as long as they are both 12mm to begin with
Logged
Throttle cables ftw
Reply #4January 06, 2007, 12:38:47 am

Audi80

  • Guest
Looking for place to buy ARP studs/bolts....
« Reply #4 on: January 06, 2007, 12:38:47 am »
I bought my studs from Summit Gas engines use 11mm bolts, those won´t fit.
Logged
Reply #5January 06, 2007, 12:48:42 am

Barry W

  • Guest
Looking for place to buy ARP studs/bolts....
« Reply #5 on: January 06, 2007, 12:48:42 am »
what other stretch bolts need replacing on a rebuild?
Logged
Reply #6January 06, 2007, 12:52:42 am

vwmike

  • Authorized Vendor
  • Veteran
  • Offline
  • ***
  • 1158
Looking for place to buy ARP studs/bolts....
« Reply #6 on: January 06, 2007, 12:52:42 am »
The rod bolts and the head bolts are your biggest concerns.
Logged
Reply #7January 06, 2007, 01:39:21 pm

Barry W

  • Guest
Looking for place to buy ARP studs/bolts....
« Reply #7 on: January 06, 2007, 01:39:21 pm »
Thanks.
Logged
Reply #8January 09, 2007, 01:03:00 am

DA-BRT

  • Junior
  • Offline
  • **
  • 140
    • http://Zwalve.eu/
Looking for place to buy ARP studs/bolts....
« Reply #8 on: January 09, 2007, 01:03:00 am »
Are these ARP bolts also Strech bolts? Or can I re use them?

Does anybody knows whichs Rod bolt set I have to get from ARP? It's for a 1.9TD (AAZ) engineblock.
Logged
Reply #9January 09, 2007, 01:58:15 am

Audi80

  • Guest
Looking for place to buy ARP studs/bolts....
« Reply #9 on: January 09, 2007, 01:58:15 am »
You can reuse them.
Logged
Reply #10January 09, 2007, 02:27:41 am

DA-BRT

  • Junior
  • Offline
  • **
  • 140
    • http://Zwalve.eu/
Looking for place to buy ARP studs/bolts....
« Reply #10 on: January 09, 2007, 02:27:41 am »
That's better!
Logged
Reply #11January 10, 2007, 12:09:31 am

fatmobile

  • Veteran
  • Offline
  • ***
  • 2926
    • http://www.geocities.com/vwfatmobile/
studs
« Reply #11 on: January 10, 2007, 12:09:31 am »
Quote
I bought my studs from Summit Gas engines use 11mm bolts, those won´t fit.

 Will the 11mm gasser studs fit the 11mm early NA diesel block with the 11mm headbolts.
 I've seen the 11mm blocks with 12point, triplesquare, 11mm, gasser streeatch bolts... so I figure the studs will work.
 If so it would be a nice upgrade for the weaker 11mm diesel headbolts that are too short and put large stress on a small area.
Logged
Tornado red, '91 Golf 4 door, with M-TDI 12mm pump, south bend clutch, VNT-15 turbo, 02A trany
MK4s: 2000 TDI jetta, 2003 TDI wagon, 2000 golf 2.0 gasser.
'84 Rabbit with 1.7TD KY block pistons bored to 80mm, VNT-15
'84 GTI with stock 1.6TD starion intercooler.
Pages: [1]
« previous next »