Author Topic: FS: Diesel Injection Pump Timing Tools (Read 6433 times)

Intolerance · « **on:** October 16, 2006, 10:41:29 am »

SOLD

$75 for the set. I will not part it out.

[/b]

burn_your_money · « **Reply #1 on:** October 16, 2006, 01:14:19 pm »

If anyone just wants the dail indicator I want the rest, if the seller is willing to sell separetly

Intolerance · « **Reply #2 on:** October 16, 2006, 05:17:48 pm »

Quote from: burn_your_money

If anyone just wants the dail indicator I want the rest, if the seller is willing to sell separetly

the dial indicator is useless without this setup.

burn_your_money · « **Reply #3 on:** October 16, 2006, 05:31:29 pm »

I wouldn't say that. I use mine all the time without the other tools. I just want them now to save the hastle of making my own

Intolerance · « **Reply #4 on:** October 16, 2006, 05:35:37 pm »

Quote from: burn_your_money

I wouldn't say that. I use mine all the time without the other tools. I just want them now to save the hastle of making my own

yeah, true, but i did modify this dial indicator to fit the bosch tool

burn_your_money · « **Reply #5 on:** October 16, 2006, 06:53:22 pm »

Is that the IP lock pin or the adaptor?

beowulf · « **Reply #6 on:** October 18, 2006, 12:43:32 pm »

Are the cam locking plate and the injection pump pin the right size to work on an AHU TDI as well as the 1.6 N/A diesel or will these only work with the 1.6L diesels? Thanks.

Intolerance · « **Reply #7 on:** October 18, 2006, 12:47:34 pm »

Quote from: beowulf

Are the cam locking plate and the injection pump pin the right size to work on an AHU TDI as well as the 1.6 N/A diesel or will these only work with the 1.6L diesels? Thanks.

I have no idea. I do not know anything about the AHU motors.

I used this on a 1.5L diesel i owned.

square · « **Reply #8 on:** October 18, 2006, 08:41:25 pm »

Quote from: beowulf

Are the cam locking plate and the injection pump pin the right size to work on an AHU TDI as well as the 1.6 N/A diesel or will these only work with the 1.6L diesels? Thanks.

This setup will not work on a TDI,
I have both a 1.6NA and 1.9TDI and there very different.

macsdub · « **Reply #9 on:** October 19, 2006, 07:58:13 am »

um i got an ahu tdi
and i have all the tools pictured
and yes all the "old" tools work on an ahu tdi
well on my tdi-m they do at least.....

yea the cam lock will work on an ahu

the pump lock works on mine (ahu)cause its old school mechanical

square · « **Reply #10 on:** October 19, 2006, 08:53:22 am »

sorry my TDI is an ALH.
the pump pin is smaller than the 1.6 and
the cam lock for the ALH has too fit around the vacuum pump mount

Patrick · « **Reply #11 on:** October 19, 2006, 03:31:03 pm »

Two , no three questions.

1) do you still have it?

2) is that canadian dollars?

3) where are you and when can I pick it up if you're close?

Intolerance · « **Reply #12 on:** October 19, 2006, 10:12:03 pm »

Quote from: Patrick

Two , no three questions.

1) do you still have it?

2) is that canadian dollars?

3) where are you and when can I pick it up if you're close?

yes....no, its US Dollar....and I am located in southern california.

Patrick · « **Reply #13 on:** October 20, 2006, 03:31:55 am »

Thanks, but you're about 3000 miles away. I SHOULD be able to find one around here, if I can't my buddy the machinist will make me one.

Anybody selling one in SW ontario?

Intolerance · « **Reply #14 on:** October 20, 2006, 06:47:14 pm »

these have been sold....

please drive through.