Author Topic: what size banjo's on the KKK turbo?  (Read 3310 times)

August 15, 2006, 08:31:58 am

regcheeseman

  • Veteran

  • Offline
  • ***

  • 714
what size banjo's on the KKK turbo?
« on: August 15, 2006, 08:31:58 am »
Anyone know what size the banjo fittings are on the KKK's, I want to make up some lines for boost controller/ gauge

Reply #1August 15, 2006, 06:09:13 pm

zooky

  • Junior

  • Offline
  • **

  • 71
what size banjo's on the KKK turbo?
« Reply #1 on: August 15, 2006, 06:09:13 pm »
no idea.
But when I was at the bone yard I noticed that the gasser VW's used some nice braided stainless steel lines that looked like the same banjo...

Reply #2August 15, 2006, 07:25:33 pm

hillfolk'r

  • Veteran

  • Offline
  • ***

  • 1532
what size banjo's on the KKK turbo?
« Reply #2 on: August 15, 2006, 07:25:33 pm »
i wanna say 10mm,but the thread picth,,i dunno
Throttle cables ftw

Reply #3August 15, 2006, 10:19:42 pm

LeeG

  • Veteran

  • Offline
  • ***

  • 401
what size banjo's on the KKK turbo?
« Reply #3 on: August 15, 2006, 10:19:42 pm »
My spare K24 has 8mm x 1.00 pitch.  
Banjo on the compressor housing, straight through pipe type fitting on wastegate.  Same thread both ends, wastegate end looks like maybe it should have a washer under for seal, but my spare does not.
'97 Passat TDI

Reply #4August 21, 2006, 10:13:34 pm

fspGTD

  • Veteran

  • Offline
  • ***

  • 1529
    • http://home.comcast.net/~vwgtd
what size banjo's on the KKK turbo?
« Reply #4 on: August 21, 2006, 10:13:34 pm »
CIS fuel banjos (like to the cold start fuel injector) fit perfectly. :)
Jake Russell
'81 VW Rabbit GTD Autocrosser 1.6lTD, SCCA FSP Class
Dieselicious Turbocharger Upgrade/Rebuild Kits

Reply #5August 21, 2006, 11:14:27 pm

hillfolk'r

  • Veteran

  • Offline
  • ***

  • 1532
what size banjo's on the KKK turbo?
« Reply #5 on: August 21, 2006, 11:14:27 pm »
doyou have the stock pipe on the turbo for the wastegate? you just cut it like mine

Throttle cables ftw