Login
▼
Register
Home
Help
Advertise
Login
Register
VWDiesel Blog
Facebook Group
VWD on Twitter
VWDiesel.net The IDI, TDI, and mTDI source.
»
General Information
»
Troubleshooting
(Moderators:
malone
,
burn_your_money
,
Vincent Waldon
,
theman53
) »
Viton IP seals?
« previous
next »
Print
Pages: [
1
]
Author
Topic: Viton IP seals? (Read 3486 times)
September 26, 2016, 11:47:17 am
Rattlebox
Newbie
Offline
12
Viton IP seals?
«
on:
September 26, 2016, 11:47:17 am »
I guess I will be looking into rebuilding my spare pump ( TD pump can be used on an IDI?).
I also have a little leak on the top of my currently installed pump at the throttle shaft. I have been running too much dinodiesel.
Where can I get a seal kit/rebuild kit with biodiesel in mind?
Also I remember a guy named Vince waldron or something of the sorts that had websites for IP rebuilding etc. I cannot find them now. Anyone got a link?
Logged
85 Jetta 1.6d Wolfsburg.
Will perform some Mk1/2 diesel services in the NE Ga/Upstate SC and WNC areas. Timing belts and accessories, IP timing, Injector installs, mechanical lifter valve adjustments.
Reply #1
September 27, 2016, 12:27:21 pm
Rattlebox
Newbie
Offline
12
Re: Viton IP seals?
«
Reply #1 on:
September 27, 2016, 12:27:21 pm »
I figured this would be a simple question to answer. I cannot find any Viton IP seals. Also the only reseal kit I find that looks close to the Bosch dgk-126 is listed as being for a TD. Is the gasket set different for my N/A?
Logged
85 Jetta 1.6d Wolfsburg.
Will perform some Mk1/2 diesel services in the NE Ga/Upstate SC and WNC areas. Timing belts and accessories, IP timing, Injector installs, mechanical lifter valve adjustments.
Reply #2
September 28, 2016, 01:09:43 am
libbydiesel
Global Moderator
Veteran
Offline
3399
Re: Viton IP seals?
«
Reply #2 on:
September 28, 2016, 01:09:43 am »
The authentic Bosch seal kits have been 100% biediesel compatible since the 90's.
The DGK-126 has the cold start o-ring but is missing the aneroid feeler pin o-ring which is part # 1-460-210347. The DGK-121 has the feeler pin o-ring but is missing the cold start o-ring. Neither kit comes with the main shaft seal which is part # 1-460-283-312.
I have gotten quite a few seal kits and individual Bosch seals/o-rings from the ebay seller angelofishes. He has always given me very good prices and very good customer service.
Logged
Reply #3
September 28, 2016, 01:18:31 am
Rattlebox
Newbie
Offline
12
Re: Viton IP seals?
«
Reply #3 on:
September 28, 2016, 01:18:31 am »
I should have known about the biodiesel compatibility since I am German and know they run a high percentage of biodiesel there.... Thanks for the info.
Logged
85 Jetta 1.6d Wolfsburg.
Will perform some Mk1/2 diesel services in the NE Ga/Upstate SC and WNC areas. Timing belts and accessories, IP timing, Injector installs, mechanical lifter valve adjustments.
Print
Pages: [
1
]
« previous
next »
VWDiesel.net The IDI, TDI, and mTDI source.
»
General Information
»
Troubleshooting
(Moderators:
malone
,
burn_your_money
,
Vincent Waldon
,
theman53
) »
Viton IP seals?