Strange clatter noise 1.6D - page 2 - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• #15 by aki91 on 29 Jan, 2015 15:22
• I dont have problem with my neighbors And i take out the hood liner because its ugly.
  Yes its a solid head and valve clearances are adjust when i rebuilt the engine its pass about 3000 km since than.
  What do you recommend for timing?
  I worm it up for few minutes idling then i took it to road, and after aprox 2 km the clutter disappears.
  
• #16 by Dakotakid on 29 Jan, 2015 18:45
• Myself, I would leave it as is.
  Especially if it runs very well warmed and at speed. Retarding the timing is going to cost performance at the top end.
  Or, turbocharge it and then it will be quieter at idle!
  In 100 years, nobody is going to remember.
• #17 by aki91 on 30 Jan, 2015 09:05
• I got the numbers from mu pumps.
  On car now is 068 130 107 L, the spare one is 068 130 081 C
  And here is the video of engine running.
  Cold start
  https://www.youtube.com/watch?v=zNR4Gej9bFI
  Normal temp.
  https://www.youtube.com/watch?v=n-V7SBF3LA0
  
• #18 by TylerDurden on 30 Jan, 2015 16:22
• Car sounds fine.
  
  :-)
  
  The spare pump is the type used on the US ECOdiesel, Bosch 460484027, not a great pump for performance... 8mm plunger (but longer stroke).
• #19 by aki91 on 30 Jan, 2015 17:38
• Ok, so that knock on cold start is normal.
  The plunger on my old pump is also 8mm?
• #20 by ORCoaster on 30 Jan, 2015 17:44
• Any one have a good place to cross reference those pump no.s?  I find the ecodiesel stroke information helpful.
  
• #21 by Smoker on 16 Feb, 2015 04:49
• Sounds like an idi
  
  Nice car, btw
• #22 by air-cooled or diesel on 16 Feb, 2015 08:58
• sounds just like mine; your ok; happy 100+100+100k+miles, or another way to put it happy trails
• #23 by aki91 on 19 Feb, 2015 12:12
• Thanks guys