look got one(or preferably 2) of the rubber hose elbows that go from the turbo to the intake on an aaz. or if you know of something else that i can use instead im all ears, i considered buying a silicone elbow reducer, but im not sure if they'll be long enough or not.
I try to support geebee if possible, if he doesn't have something then I go silicone intakes. I used one of those reducing joints on the k24 and it worked out well with some cutting.
hmm, maybe one of those will be long enough then, the ones geebee makes are on ebay and are 65 dollars, i'll use an old paper towel roll before i spend 65 dollars on that
just hours after ordering 2 of those silicone elbows, i found an original one in a box haha
There are two versions of the turbo to intake
t2/t3/k14/k24
Later is Ko3
I make both
we include clamps on all of our assys
GB
just a heads up, i got my 2" silicone elbow, it fits the k14 perfectly, but is a little loose on the intake manifold, it should seal fine though with a hose clamp, we will see.