WtB AAZ turbo to intake elbow hose

[RabbitJockey]

look got one(or preferably 2) of the rubber hose elbows that go from the turbo to the intake on an aaz.  or if you know of something else that i can use instead im all ears, i considered buying a silicone elbow reducer, but im not sure if they'll be long enough or not.

[RabbitJockey]

no one? 

[theman53]

I try to support geebee if possible, if he doesn't have something then I go silicone intakes. I used one of those reducing joints on the k24 and it worked out well with some cutting.

[RabbitJockey]

hmm, maybe one of those will be long enough then,  the ones geebee makes are on ebay and are 65 dollars, i'll use an old paper towel roll before i spend 65 dollars on that

[RabbitJockey]

http://www.amazon.com/dp/B004OZ1Z4C/ref=sr_ph?ie=UTF8&qid=1415458541&sr=1&keywords=2%22+silicone+elbow


heres what i ended up getting, i could get 5 of these for what one mk1autohaus hose costs... im guessing that those come with the clamps and everything too, but for the price difference who cares.

[RabbitJockey]

just hours after ordering 2 of those silicone elbows, i found an original one in a box haha

[GEE-BEE]

There are two versions of the turbo to intake

t2/t3/k14/k24

Later is Ko3

I make both

we include clamps on all of our assys

GB

[RabbitJockey]

just a heads up, i got my 2" silicone elbow, it fits the k14 perfectly, but is a little loose on the intake manifold, it should seal fine though with a hose clamp, we will see.